Why are my fog lights not working after installing LEDs?
When I 1st installed them, my foglights would not work and only the high beam side of the headlights was working. I cured the problem by connecting one of the halogen bulbs in parallel with one of the LED lamps. This adds some resistance to the circuit and everything works perfectly now.
Can you use LED headlamps with LED fog lights?
BS, what I did was install just the LED Fog lights and bought good quality bulbs for the headlights. It works real good, you can use some of after market Blue tinted headlight bulbs to match the color of the LED fogs if you want. But the LED fog lights kick but.
What to do when both head lights stop working at the same time?
When that happens, the operational lifespan of your headlight capsule will be severely compromised, and the only fix is to replace the headlight assembly. When both headlights stop working at the same time, the bulbs usually aren’t at fault.
What does it mean when your headlights don’t work?
With that in mind, it can be tremendously useful to start off by looking at whether both, or just one, of your headlights have failed, and whether or not the high or low beam mode still works. When headlights stop working, it’s usually an electrical problem or an physical issue with the bulbs themselves.
Where is the fog light on an Acura TL?
Please try again later. The 04-08 Acura TL uses fog light bulbs size 9006. For model years 2007-08 the fog light is located in the bumper while the light next next to the headlight is the DRL. Here is a link to the JDM ASTAR Led fog light bulbs I bought on Amazon for $25. https://www.amazon.com/gp/product/B00…
When I 1st installed them, my foglights would not work and only the high beam side of the headlights was working. I cured the problem by connecting one of the halogen bulbs in parallel with one of the LED lamps. This adds some resistance to the circuit and everything works perfectly now.
BS, what I did was install just the LED Fog lights and bought good quality bulbs for the headlights. It works real good, you can use some of after market Blue tinted headlight bulbs to match the color of the LED fogs if you want. But the LED fog lights kick but.
What should I do if my headlight light is not working?
The best way to do this is to turn the headlight switch on, connect the negative lead on your meter to a known good ground, and touch the positive lead to each headlight connector terminal. One of the terminals should show battery voltage, and the other two should show nothing if the problem is burned out bulbs.
The best way to do this is to turn the headlight switch on, connect the negative lead on your meter to a known good ground, and touch the positive lead to each headlight connector terminal. One of the terminals should show battery voltage, and the other two should show nothing if the problem is burned out bulbs.
What are the symptoms of a bad fog light relay?
Fog lights do not turn on Another common symptom of a faulty fog light relay are fog lights that do not come on at all . The fog light relay is the switch that controls power to the fog lights, and it is usually controlled either automatically by the computer or manually by the driver.
Fog lights do not turn on Another common symptom of a faulty fog light relay are fog lights that do not come on at all . The fog light relay is the switch that controls power to the fog lights, and it is usually controlled either automatically by the computer or manually by the driver.