Where is the OBD connector located?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below).

Why is my OBD2 not connecting?

Check for corrosion or debris in the plug. Check the cable itself for damage, and check the plug at the scanner too. Finding a problem with the plug or cable is easy to fix, most good scanners will have a detachable and therefore replaceable OBD cable. Just go ahead and buy a new cable, they’re not expensive.

Why won’t my scanner read my car?

Blown Fuse If you’ve plugged into your car’s diagnostic port and aren’t reading anything, you might think that your OBD-II brain has been fried, but don’t declare it dead yet. The most common reason for getting no OBD code is simply a blown fuse. Check your fuses to see if any have gone bad.

What’s the difference between OBD and OBD2?

OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle. 2. OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990’s.

What is the difference between OBD and OBD2?

What cars are compatible with OBD2?

Information

• 1996 or newer model year vehicle sold in the United States. United States legislation requires all cars and light trucks model year (MY) 1996 and newer to be OBD2 compliant.
• 2001 or newer model year gasoline vehicle sold in the European Union.
• 2004 or newer model year diesel vehicle sold in the European Union.

  Why does my OBD port not work?

  The most common cause of an OBD scanner that won’t turn on is a blown fuse on the vehicle’s OBD socket power supply circuit. If the check engine light fails to aluminate, you ca be sure the fuse has blown. Checking the vehicle’s fuse box and replacing the blown fuse fixes the issue.

  Where to find the diagnostic connector in the vehicle navigation?

  Isuzu Engines – diagnostic connector locations, with detailed diagrams, text, and pictures of where to find the diagnostic connector in the vehicle Navigation:Home-> Find Diagnostic Connector IsuzuEngines Diagnostic Connectors

  Where is the OBD2 port on a Chevy?

  On all Chevrolet vehicles 1996 and newer, the OBD2 port is located under the dashboard on driver’s side. Let’s take a look at the OBD2 port location on various Chevrolet Vehicles.

  Where is the Diagnostic Link on an Isuzu?

  Diagnostic Link Connector No. 78 Year range:1986 to 1990 Locations: Under the drivers side dash panel. In the center console. (Isuzu EFI) Use This Connector > Diagnostic Link Connector No. 27 Year range:1987 to 1997 Locations: Under the drivers side dash panel. In the center console. (Isuzu EFI) Use This Connector >

  What kind of scanner do I need for OBD2?

  Any of these top rated scanners on Amazon will work: OBDii OBD2 scanner read reset. If you need to reset the SRS, Airbag, ABS, Transmission and the rest of control units on your Mercedes-Benz, you will need a more advanced scanner such as the Launch Creader Viii.