Where is the jack on a 2004 Acura TL?

If you’re raising the font, locate the jack point in the front center of the car. If you’re jacking up the rear, locate the jack point in the back center of the rear. Place the jack on the plate, then raise the car. Make sure you make enough room for the jack stands to go under it.

How do you replace a strut on an Acura TL?

With the strut out, use the rented spring compressor to compress the coils so the top hat can be safely removed from the strut. Remove the coil and install the new strut. Torque down the fork to 30 ft/lbs and the three top hat nuts to 37 ft/lbs. The strut tower brace nuts should also only be tightened to 12 ft/lbs.

What kind of suspension does an Acura TL use?

Help remove that stress by discovering the best available kits for your TL. This article applies to the Acura TL (2004-2008). Acura TL uses a double wishbone front suspension complete with a standalone strut and spring combination that makes for a very smooth ride.

How do you remove seats from an Acura TL?

There are several 10mm bolts you have to loosen in order to remove the seats. The bench is simple: one 10mm bolt located at the button (refer to Figure 7). After the bolt is removed, press down on the seat and pull the release clip.

How much does an Acura shock absorber cost?

Shock Absorber Reviews Tokico HP Koni Sport KYB Gr2 Monroe Price Per Set $440 $560 $340 $250 Performance OEM/Sport Sport OEM/Sport OEM Durability (Based on User Experience) 75,000 miles 75,000 miles 75,000 miles 25,000 miles Lowered Up to 1.5″ Up to 1.5″ Up to 2″ No

How much does it cost to replace suspension shock on Acura TL?

The average cost for an Acura TL suspension shock or strut assembly replacement is between $1,029 and $1,108. Labor costs are estimated between $303 and $382 while parts are priced at $726.

Which is the best brand of struts for an Acura TL?

Monroe is often seen as the go-to option whenever a stock strut blows and the car needs to be on the road as soon as possible. This is the brand carried by most local major auto part retailers and can often cost as much as some of the aftermarket struts listed here.

There are several 10mm bolts you have to loosen in order to remove the seats. The bench is simple: one 10mm bolt located at the button (refer to Figure 7). After the bolt is removed, press down on the seat and pull the release clip.

How often do front struts need to be replaced?

There is no replacement schedule for front struts, through many vehicles will need to have them changed at some point. Rough driving habits may shorten the life of these parts. Struts may need to be replaced anywhere between 50,000 and 100,000 miles. If the struts start leaking, or become broken or damaged, they should be replaced immediately.