Where is the drain valve on a radiator?

Where is the drain valve on a radiator?

A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose. That drains the entire radiator AND most of the coolant from the engine.

How do you replace a radiator drainage plug?

This is a short tutorial video on how to replace your radiator drainage plug. Mine snapped off because it is plastic so I had to figure out a way to replace it. Vehicle: Used a Ford Ranger but process can likely be used in many scenarios. Supplies needed: Needle nose pliers, bucket, replacement plug. Loading…

Why is the drain valve on my radiator cracking?

3) You crack the tank. Keep in mind that the newer coolants are long life chemistries, so you’re probably not changing coolant for 5 or 10 years. The plastic tanks on modern radiator can get brittle and crack if you apply twisting stress to the drain valve. Why risk damaging a perfectly good radiator.

How to replace drainage plug-stop the leak?

How to Replace Radiator Drainage Plug – Stop the Leak! – YouTube How to Replace Radiator Drainage Plug – Stop the Leak! If playback doesn’t begin shortly, try restarting your device.

Where do you drain coolant from a radiator?

Place a drain pan under the petcock of the radiator located on the driver’s side of the radiator at the bottom. Open the petcock and drain the coolant from the radiator and cooling lines of the engine.

Where are the drains located on a car?

Your engine may have one drain or two, it will depend on the engine model and most likely will not be listed in the documentation included with your vehicle. You will have to look for the drains. The drains will be located, one on each side of the engine, in mirror locations.


How long does it take to drain a radiator?

All the coolant from the radiator and lower part of the engine drains out quickly using that technique. Then the mechanic simply reinstalls the lower radiator hose and refills the system. The entire drain procedure takes about 5-mins. But what if your radiator has a drain valve?

What’s the difference between plastic and brass radiator drain valves?

The valve, called a petcock, has changed since the old days when it was made from brass with a “T” handle. The new drain valves are plastic and are a twist-lock design—if the radiator has one. Plastic radiator drain valve petcock or “drain cock.” And that’s the point; most car makers have eliminated the radiator drain valve from their radiators.



A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose. That drains the entire radiator AND most of the coolant from the engine.

All the coolant from the radiator and lower part of the engine drains out quickly using that technique. Then the mechanic simply reinstalls the lower radiator hose and refills the system. The entire drain procedure takes about 5-mins. But what if your radiator has a drain valve?

3) You crack the tank. Keep in mind that the newer coolants are long life chemistries, so you’re probably not changing coolant for 5 or 10 years. The plastic tanks on modern radiator can get brittle and crack if you apply twisting stress to the drain valve. Why risk damaging a perfectly good radiator.

The valve, called a petcock, has changed since the old days when it was made from brass with a “T” handle. The new drain valves are plastic and are a twist-lock design—if the radiator has one. Plastic radiator drain valve petcock or “drain cock.” And that’s the point; most car makers have eliminated the radiator drain valve from their radiators.


Where to buy radiator drain plug for Ford F-150?

If you prefer to shop in person for the right Radiator Drain Plug products for your F-150, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Ford F-150.

How much does a radiator drain plug cost?

The best part is, our Ford F-150 Radiator Drain Plug products start from as little as $2.49. When it comes to your Ford F-150, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Radiator Drain Plug product and part brands so you can shop with complete confidence.

Where is the drain spigot on a Ford F150?

Locate the drain spigot, bottom of radiator, inside engine compartment, passenger side. Fasten your 1/2inch hose (about 6-12 inches long) on the spigot’s spout which points to the passenger side. Use the 19mm open wrench to loosen the white drain bolt.

If you prefer to shop in person for the right Radiator Drain Plug products for your F-150, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Ford F-150.

How much is a radiator drain plug from Advance Auto Parts?

Advance Auto Parts has 6 different Radiator Drain Plug for your vehicle, ready for shipping or in-store pick up. The best part is, our Ford F-150 Radiator Drain Plug products start from as little as $2.49. When it comes to your Ford F-150, you want parts and products from only trusted brands.

What should I use to Flush my Ford F-150 radiator?

Once the coolant is drained and you have closed the valve, refill the coolant system with distilled water. If you wish to use a chemical cleaner along with the distilled water, mix it with water while re-filling the radiator. Start the truck up to get it to operating temperature.

What kind of coolant to put in a Ford F-150 radiator?

Now that the straight water flush is done and drained from the system, you’ll want to add your 50/50 mixture of distilled water and Motorcraft Gold coolant to your F-150. Add enough to fill to the “Full” line on the degass bottle.

How do you replace the radiator on a Camaro Firebird?

Set the e-brake and put it in 1st gear, if it’s a manual transmission. Disconnect the Air Intake Temp (AIT) sensor and Mass Airflow (MAF) connections. Loosen the worm clamp where the intake connects to the throttle body and disconnect. Remove the four 10mm bolts from the upper radiator panel. Remove the panel and air intake ducting.

Where do you drain coolant in a Camaro?

There are two ways you can drain your coolant: through the drain plug (less messy, but slow), or removal of the bottom radiator hose (more messy, but much faster). Regardless of your chosen route, you’ll want to place your clean drain pan under the passenger side of the radiator.

How is the radiator held in place on a Camaro?

The fan assembly is held in place on the radiator by four tabs (blue arrows). Carefully push the fan upwards while holding the radiator until the tabs are clear, then the fan assembly should come straight down and away from the radiator.

Where to dispose of used LS1 radiator fluid?

This will provide you with an extra 30% surface area over the stock LS1 radiator and will keep your motor happy on those hot summer days! Please dispose of used radiator fluid properly. Do not let the old fluid drain into the street, gutters or your yard.

What should I do if my radiator drain plug is missing?

Use a ratchet, and following the instructions in the auto repair service manual, loosen the drain plug. Allow the coolant to drain into a bucket that you place underneath. Look at the coolant in the drain bucket. If it appears cloudy or muddy you should replace it with fresh coolant.

How do you drain coolant from a radiator?

You should practice draining the fluid from the radiator. This is accomplished by loosening the drain plug so that the coolant comes out of the radiator. Use a ratchet, and following the instructions in the auto repair service manual, loosen the drain plug.

Where is the radiator located in a car?

The radiator for your car should be under the hood and in the front part of the engine compartment. If you car’s engine compartment is located in the back of the car, the radiator should be the first part that you find when you open the rear compartment. This will be indicated in the service repair manual for your car.

You should practice draining the fluid from the radiator. This is accomplished by loosening the drain plug so that the coolant comes out of the radiator. Use a ratchet, and following the instructions in the auto repair service manual, loosen the drain plug.

What’s the drain valve on a radiator for?

A radiator drain petcock valve, or shut-off valve, allows the radiator to be drained without removing it from the vehicle. This simple valve or bolt can be easily unscrewed to drain, then sealed back to fill. Frequent use of the radiator petcock or corrosion can cause its threads to strip.

How to drain petcock on O’Reilly radiator?

Drain Cock When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. Dorman HELP! Drain Cock ☆☆☆☆☆ No rating value for Dorman HELP! Drain Cock When autocomplete results are available use up and down arrows to review and enter to select.

How does Dorman’s engine coolant recovery tank work?

Dorman’s Engine Coolant Recovery Tank uses premium plastic to withstand the effects of stress generated by the… Engine Coolant Radiator by TYC®. When you notice that your radiator is leaking, clogged or otherwise damaged, you don’t have to pay the high dealer price for a replacement any more.

Why is the petcock on my radiator not working?

Frequent use of the radiator petcock or corrosion can cause its threads to strip. When this happens, the petcock can no longer seal your radiator from coolant leaks. If you notice your car is leaking coolant, check the condition of the radiator petcock.

How do you drain the radiator in a Chevy Blazer?

Park the Blazer on a level surface. Turn the steering wheel all the way to the left and shut the Blazer off. Do not attempt to drain a radiator or open the radiator cap when the vehicle is warm/hot. Allow it to cool down. Release the hood latch and open the hood.

Where is the drain plug on a Chevy Malibu?

Insert the Allen wrench into the radiator drain plug, located at the bottom left corner of the radiator, and loosen the plug by turning it counterclockwise until coolant begins to pour out and into the catch pan. Raise the hood of your Malibu. Make sure the engine is cool and remove the radiator cap.

Where is the drain plug on a Chevy Venture?

Slide underneath and position the catch pan under the radiator on the driver’s side at the front of the Venture’s engine compartment. Insert the Allen wrench into the radiator drain plug, located at the bottom left corner of the radiator, and loosen the plug by turning it counterclockwise until coolant begins to pour out and into the catch pan.

How do you get coolant out of a radiator?

Insert the Allen wrench into the radiator drain plug, located at the bottom left corner of the radiator, and loosen the plug by turning it counterclockwise until coolant begins to pour out and into the catch pan.

How do you drain a Mercedes Benz radiator?

To drain the radiator, you’ll first have to remove the front engine protection splash shield (sometimes referred to as a “belly pan”), a plastic cover attached beneath the bumper, to reveal the bottom of the radiator and petcock. This plastic cover is held in place with seven 8mm hex-head screws.

How do you drain a Mercedes Benz W211?

Hand pump to remove coolant. To drain the radiator, you’ll first have to remove the front engine protection splash shield (sometimes referred to as a “belly pan”), a plastic cover attached beneath the bumper, to reveal the bottom of the radiator and petcock. This plastic cover is held in place with seven 8mm hex-head screws.

Where do I find the drain plug on my radiator?

In order to locate the radiator drain plug you need to have a schematic drawing of the radiator for your car. With this drawing you can easily find the plug. Find an auto repair manual for the style and type of car you own. This can be purchased at an auto parts supply store.

How to Replace Radiator Drainage Plug – Stop the Leak! – YouTube How to Replace Radiator Drainage Plug – Stop the Leak! If playback doesn’t begin shortly, try restarting your device.

Use a ratchet, and following the instructions in the auto repair service manual, loosen the drain plug. Allow the coolant to drain into a bucket that you place underneath. Look at the coolant in the drain bucket. If it appears cloudy or muddy you should replace it with fresh coolant.

The radiator for your car should be under the hood and in the front part of the engine compartment. If you car’s engine compartment is located in the back of the car, the radiator should be the first part that you find when you open the rear compartment. This will be indicated in the service repair manual for your car.

Where is drain plug located?

The drain plug will be most often located stern or bow (front or back) and on the deck, usually well above the water line. Occasionally, particularly on sit-in rec kayaks, the drain will be on the side of the kayak, located more to the center. Drain plugs are not to be confused with scupper plugs.

Where is the radiator plug?

Hi pitina, The radiator plug is usually located at the base of the radiator and looks like a wing-nut. When removed the entire contents of your radiator will be drained.

Where is the coolant drain plug?

Align the coolant drain pan beneath the radiator in the location of the drain plug. It is located on the bottom of the radiator closest to the passenger side (near the lower radiator hose).

How do you drain radiator coolant in Chevy Silverado?

After reattaching the lower hose, remove the upper hose and start the truck. While in the cab, turn on your heater to hot. Run water from the garden hose into the coolant reservoir tank, and run the engine until clear water begins to run from the top hose.

What happens when coolant drains into the radiator?

As the coolant drains from the reservoir, pour the remaining full-strength coolant into the reservoir and allow it to drain into the radiator before adding more 50/50 mixture. A higher content of anti-freeze in the system than intended is not a benefit! Often times, this can reduce the efficiency of the cooling system to dispel heat. Figure 3.

Look at the bottom of the radiator, as most of the time the drain valve is located there. Grab a garden hose and clip it with the help of a clip to the outlet, so the water runs outside.

Where is the radiator in a car located?

Lift the hood of your vehicle and locate the radiator. The radiator is a long, narrow metal tank usually at the front of your vehicle and next to the engine. Check the tubing for any cracks or rust. If you notice problems like this, take your car to a mechanic or find replacement parts at a local car parts store.

Where is the bleed key on a radiator?

The bleed valve is the small metal square or screw found inside the surrounding nut. Put your container or towel on the floor beneath the bleed valve. This is to catch any drips and protect your flooring from any discoloured water. Take your radiator bleed key and insert it into the bleed valve until they have locked together.

Can you change the radiator fluid on a Lumina?

Changing the Lumina’s radiator fluid is fairly simple, but it is important to properly drain the engine of the old radiator fluid first. The radiator cannot be properly drained without first alleviating the pressure within the radiator, so the radiator cap must be removed first.

Where is the drain plug on a radiator?

At the bottom of the engine-side of the radiator is a drain plug, sometimes referred to as a “petcock.” The plug looks very much like a wing-nut. Grasp the two “wings” with a pair of pliers, then twist the petcock in a counterclockwise direction to remove it.

What to do when water comes out of bottom of radiator?

Turn the hose on and monitor the water that exits from the bottom of the radiator. When the fluid exiting from the radiator runs clear, the engine has been flushed. Remove the garden hose and close the cap on the radiator’s reservoir, then reinstall the petcock plug.

How do you flush a radiator in a car?

Lift the cap located on the top of the radiator’s reservoir, then insert a garden hose into the reservoir. Turn the hose on and monitor the water that exits from the bottom of the radiator. When the fluid exiting from the radiator runs clear, the engine has been flushed.

What to do when radiator drains in Chevy Silverado?

Add more 50/50 mix as the reservoir drains down. No matter how long you drain it, there is still some water remaining in your engine block. Some mechanics and DIY’ers fill the reservoir to the fill line with straight coolant in order to boost the engine’s overall coolant mixture to the desired 50/50.

Add more 50/50 mix as the reservoir drains down. No matter how long you drain it, there is still some water remaining in your engine block. Some mechanics and DIY’ers fill the reservoir to the fill line with straight coolant in order to boost the engine’s overall coolant mixture to the desired 50/50.

What are the drain holes on a Chevy V8?

MSD, CarQuest, BWD, Pertronix, and others build replacement optical distributors that are more reliable than the original unit, for a lower price. The drain holes on the bottom are larger than factory units, and a newer vented design uses a fresh air source and vacuum tube to keep gases and moisture from building up under the cap.

How do you remove coolant from a Chevy Silverado?

But now, the only way to remove the coolant from your Silverado is to disconnect the lower radiator hose and allow it to drain into your drain pan. Fortunately, being a truck, your Silverado’s ride height means that jacking the truck up isn’t even required.

A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose. That drains the entire radiator AND most of the coolant from the engine.

How do you drain down a radiator system?

Go around your house ensuring that all the radiator valves are open, then go back to your radiator with the attached hosepipe and open up the valve. All the water will start to drain out. To get the water to drain out more quickly and effectively, go upstairs and open the bleed valves on all of your upstairs radiators.

How long does it take to drain radiator?

Let your engine idle with the radiator flush inside for at least 10 minutes, but time and weather permitting run your vehicle for 3-6 hours with the radiator flush and water solution in your cooling system.

In order to locate the radiator drain plug you need to have a schematic drawing of the radiator for your car. With this drawing you can easily find the plug. Find an auto repair manual for the style and type of car you own. This can be purchased at an auto parts supply store.

A radiator drain petcock valve, or shut-off valve, allows the radiator to be drained without removing it from the vehicle. This simple valve or bolt can be easily unscrewed to drain, then sealed back to fill. Frequent use of the radiator petcock or corrosion can cause its threads to strip.

How does a radiator drain petcock valve work?

A radiator drain petcock valve, or shut-off valve, allows the radiator to be drained without removing it from the vehicle. This simple valve or bolt can be easily unscrewed to drain, then sealed back to fill.

What’s the best way to drain a radiator?

Remove the radiator cap or reservoir cap and place the cap where the hood latch is. This prevents you from shutting the hood and forgetting the cap. Step 6: Drain the radiator. Place a large drain pan under the radiator drain cock and open the drain cock, letting the coolant drain out of the radiator into the drain pan.

What does it mean when your Radiator is leaking coolant?

This aided the vehicles in draining out the coolant during a radiator or system flush without the mess. If there is an event that the drain cock begins to leak, coolant will drip or spray out.

Where is the drain plug on a GMC Truck?

On the driver’s side, there is a hose that goes from the bottom of radiator and straight up. pull it out of the ring holding in against the radiator and into whatever you’ll be draining the coolant into. at that hose is a plastic knob/valve. You need pliers if it’s tough to turn. the fluid should start flowing out of the hose.