Where is the AC low side service port?

The low side service valve is located in the line that runs from the compressor through the evaporator (firewall) and up to the condensor on the low pressure (suction) side of the system.

Where is the low side fitting?

The LOW side fitting is usually located on the suction hose or line that goes from the accumulator to the compressor. The HIGH side fitting is located on the line that goes from the compressor to the condenser.

How do you tell a high side from low side AC?

The high side, or discharge line, will be the line connected to the compressor from the bottom or lower position. It will not be wrapped in insulation and will be warm to the touch.

How can you tell high and low side AC?

The low side line of the system will have a larger diameter metal pipe than the high-side. The low side service port is usually located between the AC compressor and evaporator. The low side service port will have a black or blue plastic cap that needs to be removed.

Where is the low side of the a / C port?

The A/C is not working and I want to check the pressure on both the low and high side, but can not find the low side port. There are 2 ports (both a large and small size) on the metal line running from the evaporator to the condenser, but I can’t find a port between the compressor and the evaporator, which should be the low side.

Where is the low side Freon recharge port?

There are 2 ports (both a large and small size) on the metal line running from the evaporator to the condenser, but I can’t find a port between the compressor and the evaporator, which should be the low side. Please let me know where to low side port is. Re: A/C freon recharge – low side port?

Where is the low pressure port on a Silverado Sierra?

I have a 2001 silverado 5.3 and just added some 134 and the low pressure port was the smaller one and was located closest to the cab the high pressure port was closest to the front of the truck and larger in size. My truck was blowing cool but not cold in heat. I added 1/2 a can of 134 and it’s blowing nice and cold now.

Are there any problems with the Acura RL?

Acura is currently doing major improvements to the RL and since the model has not unleashed its full potential yet, there are a few problems in some Acura RL parts that current owners may encounter: All vehicles in general encounter issues with the suspension system and Acura RL is no exception.

What kind of COMPRES-Sor has low side and high side ports?

Blissfied (Tecumseh) and York style compres- sors are known as reciprocating, upright or in-line type compressors. The Sanden (Sankyo) and Seltec (Diesel KIKI, Zexel) are rotary types. The suction side (low side) and discharge side (high side) ports are usually stamped with the letters “S” or “D” on the compressors head.

Where are the suction and discharge ports on a compressor?

The suction side (low side) and discharge side (high side) ports are usually stamped with the letters “S” or “D” on the compressors head. COMPRESSORS Table of Contents

What kind of engine does an Acura RL have?

There were RL, RL-ADV, RL-H, RL-A and RL-TEC trim levels available. And from 2005 to 2008, it got power from 3.5 L 290 hp V6 engine, and from 2009 to 2012, engine was upgraded to a 3.7 L 300 hp V6 engine.