Where are the shocks located on a corvette?

This 24 mm long bolt on the lower rear axle should come out first. Remove the upper bolts from the rear shocks next. These are smaller and should be a little easier to remove. Figure 3. The two smaller bolts of the upper mount should be easier to remove. This is perhaps the most difficult part of this installment.

How does the rear suspension work on a corvette?

The rear steers left or right on the throttle, and it steers the opposite direction off the throttle. On a rough road, it may require a stop at the closest bathroom for a change of underwear. The axle shaft universal joints are also an integral part of the suspension camber control.

What’s the best way to replace struts on a car?

Struts can be difficult to replace, so it’s best to let a professional handle that job. 2. Purchase new shock absorbers. If you’re unsure what type of shock absorbers you need, speak to someone at your local auto parts store or an auto mechanic to be sure you buy the right shock absorbers or piston for your vehicle.

How do you replace a Ford rear shock absorber?

On some Ford products there’s an external motor drive, and you can unplug it from the old shock and install it on the new one. In most other cases, you get a choice of shock absorber designs. If the shock rod spins endlessly as you try to remove the upper mount, try Vise-Grips on the flatted end of the rod.

How much torque do you need for shocks on a C6 Corvette?

You’ll need to torque the upper bolts to 22 ft-lb. and the lower bolt to 107 ft-lb. Once you finish the install, go for a short test drive and listen for any odd sounds that would indicate a loose bolt. If all seems well, recheck the torque on all the bolts around 3000 miles later.