What to do if your Acura Dashboard Light does not turn on?

Park your ACURA in a safe area where you can work safely. Locate the diagnostic port under the dashboard. Turn on the ignition. All ACURA dashboard lights should turn on but do not start the engine. If your ACURA has START/STOP button, press it twice without pressing on the brake pedal. Allow your OBD-2 scanner to connect to the vehicle.

Why does my Acura ABS light keep coming on?

Common symptoms that you may notice when there is a problem with the Acura ABS: Wheels may lock and slide when braking. Common problems that trigger the ABS light to stay on: To reset the ABS light on an Acura, you first need to read the codes with an ABS scanner.

How can I read the ABS code on my Acura?

Allow your OBD-2 scanner to connect to the vehicle. This may take a few seconds. Select ACURA from the menu. Next, select the Anti-lock Brake System menu. Using an OBD-II Scanner that can read the ABS, read codes from the ABS module.

How to reset the codes for an Acura TL after a dead?

“Code” will be displayed for a deactivated stereo or navigation system. Enter the stereo reset code using the numbers on the channel preset buttons. The reset code consists of the numbers 1 through 6, which correspond with the channel preset buttons 1 through 6.

What are common reasons my Acura TL won’t start?

What are common reasons my Acura TL won’t start? While there are a variety of reasons your Acura TL won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter. How is a no-start diagnosis fixed?

Are there any problems with the Acura TL V6?

Tap the to learn more about the most common Acura problems. The 1998-2014 Acura TL V6 may develop issues with the automatic transmission. The Airbag (SRS) warning light may illuminate due to one or more failed sensors. A loud rattle type noise may be noted from the engine after a cold start.

What are the most common problems with an Acura?

To check for problems affecting your car, select your make and model below: Tap theto learn more about the most common Acura problems. The engine may stall when the engine is warmed up. The AC compressor may seize resulting in loss of cold air from the AC vents.

What to do if your Acura TL is having transmission problems?

Once the problem is fixed, you can go to Transmission menu > Erase Codes to reset the transmission fault codes. Let’s take a look at common Acura transmission problems. A common problem that affects many Acura (such as TL and MDX) is transmission shudder and vibrations when driving.

Why is my Acura not moving out of Park?

It can be scary if your Acura shifter won’t move out of Park. Not only are you stuck in a parking lot or garage, but now you are worried about an expensive car repair. A bad brake light switch typically causes the problem, or the ignition switch is not releasing the shifter from the park.

When do transmission problems start on an Acura?

Troubleshooting Acura Transmission Problems. Even though Acura makes dependable vehicles, transmission slipping, poor shifting, shudder, or skipping are some problems that Acura owners often face. Acura transmission problems can start as early as 60,000 miles and are typically noticeable in cold weather or at startup.

Are there any problems with the Acura clutch pack?

Read fault codes via the OBD2 port located under the dashboard using an OBD2 scanner. Another problem that can affect some Acuras is that the 3rd gear clutch pack may wear prematurely. If this happens, you may have issues upshifting or downshifting in 3rd gear.

What to do if your Acura is stuck in gear?

If your Acura is stuck in gear or you notice a delay in shifting, the first thing that you need to do is check the transmission fluid level. Do not drive an Acura with low transmission fluid.

Why are the solenoids on my Acura not working?

Multiple solenoids are mounted on the valve body of the Acura transmission. Due to age, these solenoids can fail or get sticky, causing erratic shifting. Sensors mounted on the valve body can get dirty or stop working if there is a short in the wire harness. It is possible to overhaul the valve body instead of replacing it.

What does the VSA light on an Acura mean?

During cornering, if the vehicle turns more or less than desired the VSA system help stabilizes the car. When driving on loose or slippery roads, the VSA system assists the driver to maintain it’s traction. If the indicator light illuminates, it indicates that there is a problem with the VSA system and has it checked by an Acura mechanic.

What does it mean when the Acura warning light illuminates?

Check the camera for visual inspection and remove anything that is blocking it. If the indicator light illuminates it means that either the temperature is too high or the camera is blocked. Have a visual inspection of the camera and remove anything that is blocking it.

What does it mean when the Acura brake light comes on?

Have an auto mechanic diagnose your Acura braking system. If this light comes on, it means there is low oil pressure in the engine. Stop the vehicle as soon as possible and check the oil level. Add oil if the level is too low.

What does the Acura AWD indicator light mean?

If the indicator light illuminates, it indicates that there is a problem with the VSA system and has it checked by an Acura mechanic. If the Super-Handling All-Wheel Drive (SH-AWD) indicator light illuminates, it means that the system is malfunctioning.

Why does my Acura have a battery symbol?

The emission control system may have a problem or your engine cylinder could be misfiring. If the battery symbol appears on the dashboard, it means that there is a problem with the charging system. The battery is not getting charged, or the alternator is not generating enough power.

Why is my starter relay not working properly?

Intermittent issues starting the vehicle If the starter relay is working properly, it will send power to the starter every time it is engaged. However, it is possible that the starter relay will become damaged due to excessive heat, dirt, and debris or other issues that might cause sporadic operation of the starter.

Why does my Acura MDX have a no start problem?

If you’re experiencing an intermittent no-start, look at your key ring setup (how many keys, the size of the key ring, and what the key fob’s made of.) Under certain conditions, any combination of too many keys and a large key ring, and a metal key fob can contribute to an occasional no-start. Here’s how:

How does the maintenance schedule work on an Acura?

Maintenance Schedule. The Maintenance Schedule calculates service needs based on your car’s mileage. It checks engine-operating conditions and helps coordinate oil service dates and other maintenance check-ups. Prevent problems before they occur.

How often should I change the oil on my Acura?

* 1: If the message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year. Independent of the Maintenance Minder information, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.