What kind of fuel line do you need for LS swaps?

For LS swaps an Walbro 255L inline is a very common install. This pump can easily be converted to AN6 style fittings to use with Hot Rod fuel hose lines and make for an easy fuel system install. Pre – pump you will want to install a 100 Micron Fuel filter to protect the pump from debris.

What kind of regulator do you need for fuel line?

The Return less setup with the corvette style regulator is perfect for both in tank and in pump installs. Hot Rod fuel hose recommends an AN6 fuel line kit for this style of install. Using the proper fittings you can easily install from the tank, to regulator, to fuel rails and have an effective setup with minimal effort.

Do you need an AN6 fuel line kit?

Hot Rod fuel hose recommends an AN6 fuel line kit for this style of install. Using the proper fittings you can easily install from the tank, to regulator, to fuel rails and have an effective setup with minimal effort. Check out our LS swap kits for the easiest install options.

What kind of fuel line do you need for a hot rod?

Hot Rod fuel hose recommends an AN6 fuel line kit for this style of install. Using the proper fittings you can easily install from the tank, to regulator, to fuel rails and have an effective setup with minimal effort.

Why does my Chevy Trailblazer smell like gasoline?

“Corrosion may cause small perforations with fuel tank modular reservoir assembly. Perforations may allow small amount of fuel to accumulate in a recessed area outside of the fuel tank. If this were to occur, it would be accompanied by a fuel odor.

Is there a gas leak in my Chevy Trailblazer?

I live in PA and about 2 weeks ago I detected an odor of gas near the rear of my 2004 TB Ext. I did not see any sign of a leak at 1st but after a few days I did notice a stain on the driveway. I printed out the info above and brought the TB to a local Chevy dealer.

Do you need a return line for a gas tank?

The two line tanks dont have the return line. You dont generally need to run a return line if youre running a mechanical pump. You do need one (highly recommmended?) if you have an electrical pump. You must vent your tank in some way or you will have fuel delivery problems.

Where are the line ports on a gas tank?

When looking at my tank, it has 4 line ports. The inlet port is on top of the tank. There is one on the drivers side pointing forward that I assume is for the charcoal canister. And there are 2 pointing forward on the passenger side of the tank.