What kind of engine does an Audi S4 have?

What kind of engine does an Audi S4 have?

These cars were equipped with either 2.2L I5 or 4.2L V8 engines. Second Generation: Known as B5 or Type 8D, the second-generation Audi S4 B5 for sale was produced between 1997 and 2002. The body style was similar to the previous generation, but these cars used 2.7L V6 engines.

When did Audi B5 S4 go out of production?

Production of the B5 S4 ceased in September 2001, although it was still sold together with the next B6 platform generation through 2002 in North America. Examples produced July 2001 to end of production are 2002 Model Year cars, the 10th digit of the VIN being the number “2”.

What to look for in an Audi A4 B6?

Click on the buttons below to read more about typical problems that fall outside of the scope of routine maintenance. The power steering pump and the steering rack are some of the weak points in a second-hand Audi A4 (B6). Therefore, when buying one of these cars, look out for:

What’s the drag coefficient of an Audi S4 Avant?

With unique front and rear bumpers and side sills, and the rear spoiler from the S4 Avant, the aerodynamic modifications achieved a drag coefficient of C d 0.34. Although the B5 S4 came in a saloon car body style, the B5 RS 4 was only available in the Avant version.

What kind of engine does an Audi S4 Avant have?

What is the drivetrain, Audi S4 Avant (8E,B6) Station wagon (estate) 2003 4.2i V8 (344 Hp) quattro? All wheel drive (4×4). Internal Combustion engine. How long is this vehicle, 2003 Audi S4 Station wagon (estate)?

What’s the difference between Audi B6 and B6 S4?

Jumping ahead to the next generation, Audi introduced the B6 S4 with a shortened version of the 4.2 liter V8 producing 340 HP right from the factory. The lightweight aluminum V8 actually comes in right around the same weight as cast iron block 2.7t, a significant improvement in the power-to-weight ratio.

How much horsepower does the Audi B5 S4 have?

The world got its first look at Audi’s 2.7t bi-turbo engine when Audi launched the B5 S4. The engine was an immediate hit among enthusiasts with its deceptively powerful, long, flat torque curve and an advertised 250 HP (265 HP in Europe).

What’s the difference between the B6 and 2.7t?

Unfortunately, the 2.7t could, at times, also be prone to intake plumbing problems and turbocharger failures. Jumping ahead to the next generation, Audi introduced the B6 S4 with a shortened version of the 4.2 liter V8 producing 340 HP right from the factory.

Technical Specifications 2004 Audi S4 Sedan. ENGINE: Type V8-arrangement 8-cylinder with Double Overhead Camshafts and two-stage variable intake manifold Arrangement Front mounted Bore 3.33 in. 84.5 mm Stroke 3.65 in. 92.8 mm Displacement 254 cu. in.

How big are the wheels on a 2004 Audi S4?

Technical Specifications (continued) 2004 Audi S4 Sedan WHEELS: Standard (CL7) Size 8J x 18 Offset 43 mm Weight 5.8 lbs Type Cast alloy TIRES: Standard (H2U) Size 235 / 40 Speed rating Z Construction Radial Load Index 91 Brand / Type (all approved)Conti Sport Contact 2 BODY:

What kind of braking system does an Audi A4 have?

For stopping power, the A4 (B7) S4 4.2 V8 Quattro braking system includes Vented Discs at the front and Vented Discs at the rear. The A4 (B7) model is a car manufactured by Audi, with 4 doors and 5 seats, sold new from year 2004 . How much horsepower does a 2004 Audi A4 (B7) S4 4.2 V8 Quattro have?

How much horsepower does an Audi A4 Quattro have?

The 2004 Audi A4 (B7) S4 4.2 V8 Quattro has 344 PS / 339 bhp / 253 kW horsepower. How much does a Audi A4 (B7) S4 4.2 V8 Quattro weighs? What is the top speed of a Audi A4 (B7) S4 4.2 V8 Quattro? Is Audi A4 (B7) S4 4.2 V8 Quattro All Wheel Drive (AWD)? Yes, the Audi A4 (B7) S4 4.2 V8 Quattro is All Wheel Drive (AWD).

What’s the price of a 2004 Audi S4?

The EPA-estimated gas mileage for the 2004 Audi S4 is 13 mpg for city travel and 20 mpg on the highway. What is the original MSRP of the 2004 Audi S4? The original MSRP of the 2004 Audi S4 is from $46,370 to $54,570. The data above is updated daily, based on used car inventory for sale on CARFAX for the last five model years of this car.

What does the secondary air injection code p0492 mean?

The P0492 code tell there is a fault with the system – usually that the secondary air flow is too low on bank 2. Bank #2 is the side of the engine that does not contain cylinder #1. For bank #1, see code P0491.

What is the second p code for Audi?

The second code is referred to as a P-code and follows a structure required by law and defined by the Society of Automotive Engineers (SAE). This standard uses a letter to designate the system and four numbers to further identify and detail the malfunction as listed below. This is about a 35 page table.

Where can I find the trouble code on my Audi?

Audi Diagnostic Trouble Codes (DTCs) and data can be retrieved with VW/Audi Factory Scan Tools such as the VAG 1551, VAG 1552, or the new diagnostic computer VAS 5051 through a Data Link Connector (DLC). For location of the data link connector, see Maintenance section.

As we mentioned, the 2009 Audi S4 debuted with a 3.0-liter supercharged V6 producing 333 hp. It wasn’t quite as powerful as the old V8, but it was lighter and avoided the gas guzzler tax. It was also no slouch in terms of performance, with the manual cars hitting 60 mph in 4.9 seconds.

What’s the price of a 2009 Audi S5?

The V8 S5 may not be the easiest car in the world to maintain, but prices are rather affordable and manual examples can be found for between $12,000 and $30,000 depending on mileage and condition. As we mentioned, the 2009 Audi S4 debuted with a 3.0-liter supercharged V6 producing 333 hp.

How many miles per gallon does the Audi S4 get?

Audi of America claims that the version of the S4 achieves 28 highway miles per gallon, and a 0 to 60 mph (96.6 km/h) acceleration time of 4.9 seconds with the manual transmission and 5.1 seconds with the S tronic. Fuel consumption is rated at a combined 24.2 miles per US gallon (9.7 L/100 km; 29.1 mpg ‑imp ).

What is the final drive ratio of an Audi S4?

Front and rear axle final drive ratio is either 4.111 or 3.889 (dependent on transmission type), and the rear axle (parts code prefix: 017, identification codes: AAT, AET) uses a driver-selectable electro-pneumatic-mechanical switchable diff lock.

What kind of engine does the Audi S4 have?

The powertrain details of the B5 S4 feature a 2.7-litre twin-turbo (‘biturbo’) 90° third-generation V6 engine (parts code prefix: 078, identification codes: AGB, AZB, APB). Details of the powerplant include a cast iron cylinder block with two lightweight aluminium alloy cylinder heads.

What kind of suspension does the Audi S4 have?

The B5 S4 is fitted with 4-wheel independent suspension. The front suspension is a multi-link design with four individual control arms per wheel. The rear suspension is an unequal length double wishbone design; the lower control arms are mounted to a subframe which also carries the differential housing.

Front and rear axle final drive ratio is either 4.111 or 3.889 (dependent on transmission type), and the rear axle (parts code prefix: 017, identification codes: AAT, AET) uses a driver-selectable electro-pneumatic-mechanical switchable diff lock.

What’s the difference between Audi A4 and S4?

A more powerful internal combustion engine, larger upgraded brakes, firmer suspension, larger wheels, and distinctive sheetmetal, styling clues and badging have always been amongst the many upgrades the S4 receives over its mainstream 100 and A4 siblings.