What does VTM 4 mean on a 2004 Acura MDX?
Variable Torque Management 4WD System
The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions. If more traction is needed when your MDX is stuck, or is likely to become stuck, you can use the VTM-4 Lock button to increase torque to the rear wheels.
How do you reset a 2004 Acura MDX?
Maint, light
- Turn off the engine.
- Press and hold the select / reset buttons on the instrument panel, then turn the ignition switch ON (II).
- Hold the buttons for at least 10 seconds, until the indicator resets.
What does VTM-4 lock mean?
The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.
How do you activate the VTM-4 lock on a Honda Pilot?
If you become stuck, you can activate the VTM-4 by pressing the VTM-4 LOCK button while in first (1), second (2), or reverse (R) gear below 18 mph (30 km/h). This mode overrides the auto system to send maximum torque to the rear axle.
What is a VTM-4 lock?
How do you turn off the VTM-4 on a 2004 Honda Pilot?
To turn off vtm 4 in a honda pilot you will need to hold the button until the light turns off. With car started, press the vtm-4 lock button on the dash. Put foot on break and shift car into drive. Turn car off and put car into park.
How do I turn off the maintenance required light on my Acura MDX?
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine. Hold the SELECT and RESET buttons until the indicator resets, hold for about 10 seconds. Turn the ignition off and then start the engine to verify the indicator has been reset.
What does VTM-4 mean on a 2003 Honda Pilot?
Variable Torque Management 4-Wheel Drive
Honda Grade Logic Control technology is designed to hold the vehicle in a lower gear when climbing or descending a steep grade for improved performance. Ensuring a high level of all-weather stability, traction and control is the Pilot’s VTM-4 (Variable Torque Management 4-Wheel Drive) system.
What are the specs of a 2004 Acura MDX?
Cargo volume measures 81.5 cubic feet when the second- and third-row seats are folded flat. Standard features include leather upholstery, remote keyless entry, a power moonroof and a seven-speaker Acura cassette/CD stereo system. A 265-hp, 3.5-liter V-6 engine teams with a five-speed-automatic transmission.
Where does the Acura MDX minivan come from?
Built on the platform used for the Honda Odyssey minivan, the MDX borrows some components such as the V-6 engine from that model. Manufactured in Ontario, Canada, the MDX competes against such rivals as the BMW X5, Lexus RX 330 and Mercedes-Benz M-Class.
Do you need to adjust the valves on an Acura MDX?
The valves need to be adjusted. Its stupid but mine did the same thing. 12 people found this helpful.
How many seats does the Acura MDX have?
Riding a 106.3-inch wheelbase, the MDX measures 188.5 inches long overall and 68.7 inches tall. Interior. Seven people occupy three rows of seats in the MDX, which contains two front buckets, a three-place split middle bench and a two-place split rear seat.
What does VTM-4 stand for on a MDX?
Hello, VTM-4 stands for “Variable Torque Management” related to the Super Handling All Wheel Drive SH-AWD system your MDX has. The warning light can come on in relation to a failure that causes the check engine light to also come on. Focus on diagnostic testing for the check engine light; repairing a common failure will likely resolve both lights.
How often does the vtm4 light come on?
I have a 2003 with a VTM4 light that comes on every so often. When this happens it turns into a FWD, and the torque-steer is incredibly dangerous when you least expect it. It was in 3 times for this problem and Acura could not fix it.
How can I Fix my Acura MDX vtm4 light?
1. Unbolt front of third-row passenger seat. Pop the plastic covers and take out the 2 14mm bolts. 2. Fold seat back 3. Pop off small door on side wall. There’s your box. 4. Pop off both wires/plugs, and unbolt box with 4 12mm bolts.
Where is the O2 sensor on my VTM-4?
My VTM-4 light came one around 175,000kms I took it into Napa auto part store, had the rep hook it up to the scan tool. It came back with BANK 2 SENSOR 1. Which is an o2 sensor that needs to be replace from the top of the engine. You can see it once you open your hood located behind the cooling fan.