What does VSA mean on a Acura TSX?

What does VSA mean on a Acura TSX?

Vehicle Stability Assist
Vehicle Stability Assist (VSA®), aka Electronic Stability Control. (ESC) System. Helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It assists in maintaining traction on slippery surfaces by regulating engine output and selectively applying the brakes.

What does VSA stand for in an Acura?

Vehicle Stability Assist™
Vehicle Stability Assist™ (VSA®) with Traction Control | Joe Rizza Acura.

What does triangle with exclamation point mean Acura TL?

If you have just noticed that your yellow triangle surrounding an exclamation point VSA warning light has come on, the most likely cause is you shut the system off accidentally. In vehicles a few years old, the system has a manual button that you can press to shut the system off in certain situations.

What does a triangle with exclamation mark mean on car?

Vehicle Stability Assist system
If you see that warning light triangle with an exclamation mark appear there’s a simple explanation. This icon stands for your Honda vehicle’s Vehicle Stability Assist system and will illuminate your dashboard when an issue with the system is detected.

How to neutralize the VSA sensor on an Acura TSX?

2) Press and hold the brake pedal and switch on the ignition. 3) Wait for the ABS light to turn off and then remove your foot from the brake pedal. 4) Wait for the ABS light to turn on, then press and hold the brake pedal again. 5) ABS light should turn off, then remove your foot from the brake pedal.

What is the error code 84 for VSA sensor neutral?

ABS blinks error 84 – “VSA sensor neutral position memorization”. Big letters say: do not press the brake pedal. I left the pins jumped (connected), turned the key, ABS light was off, I pressed “vsa off”, then ABS light was on, again I pressed the “vsa off” button and nothhig happened…

What does the VSA light on the Check Engine mean?

Thank Marvin. The vsa light means that the Vehicle Stability Control or Traction Control has been activated. If the engine light is on and the vsa light is on, then there could be an issue with the traction control system. Check all of the wheel speed sensors and make sure that the are plugged in and working.

What does 84-1 code Sensor logic failure error mean?

I keep getting an 84-1 code, sensor logic failure error, on my 04 TSX. The triangle with the ! in it is on steady and remains as soon as I start the car. When I drive for a short period the “check VSA system” light comes on and also remains on.

2) Press and hold the brake pedal and switch on the ignition. 3) Wait for the ABS light to turn off and then remove your foot from the brake pedal. 4) Wait for the ABS light to turn on, then press and hold the brake pedal again. 5) ABS light should turn off, then remove your foot from the brake pedal.

ABS blinks error 84 – “VSA sensor neutral position memorization”. Big letters say: do not press the brake pedal. I left the pins jumped (connected), turned the key, ABS light was off, I pressed “vsa off”, then ABS light was on, again I pressed the “vsa off” button and nothhig happened…

I keep getting an 84-1 code, sensor logic failure error, on my 04 TSX. The triangle with the ! in it is on steady and remains as soon as I start the car. When I drive for a short period the “check VSA system” light comes on and also remains on.