What does the wrench light mean on my Honda Pilot?

Maintenance Minder™: This symbol is shaped like a yellow wrench and appears any time your Honda Pilot needs routine maintenance.

How do I reset my Honda wrench light?

Resetting Your Honda Oil Maintenance Light in 4 Steps

1. Turn the ignition to run (one click before starting the engine).
2. Press the Select/Reset button located on either your steering wheel or as a knob on your dash.
3. Press and hold the Select/Reset button for 10 seconds.

What does the little wrench light mean?

The wrench light is a powertrain malfunction indicator light. When it comes on, you may experience a severe reduction in the vehicle’s performance. the light is a reminder that your maintenance is due. oil change & tire rotation and a schedule check on the vehicle.

How do you turn off the maintenance required light on a Honda Pilot?

Clear it with these steps.

1. Turn the ignition switch to the “OFF” position.
2. Press and hold the “Select/Reset” button on the instrument panel.
3. While continuing the hold the “Select/Reset” button, turn the ignition “ON“.
4. Still continue to hold the button(s) for 10 seconds or until the Maint Reqd indicator resets.

Can you turn off idle stop on Honda Pilot?

The idle-stop feature helps you maximize fuel efficiency by automatically shutting the engine off when the vehicle brakes to a stop for at least 2 seconds. The default idle-stop feature can easily be disabled if needed. After restarting the vehicle, idle-stop defaults to “ON.”

What does the wrench light mean on a 2009 Honda Civic?

The yellow wrench is alerting you that the oil life indicator has gone to 15% and service should be completed soon. If you look where the mileage normally is you will see an “A” or a “B” with a number after it. This letting you know what service is due.

What does the yellow wrench light mean on a Ford?

powertrain malfunction indicator light
The wrench warning light on Ford vehicles is the powertrain malfunction indicator light. When it illuminates, it means that the computer has detected an issue with your vehicle’s powertrain or four-wheel-drive system.

What does the yellow wrench light on a Honda Civic mean?

The wrench light is the maintenance light. When you get back from your trip get in and get an oil change. Then press and hold the trip reset button insert the key and turn the ignition to the on position while holding the trip reset button in. What Does The Yellow Wrench Mean Honda Civic Dashboard Symbols Wrench Honda Check Engine Led

What does the Check Engine light mean on a Honda?

The check engine light is a light that the engine computer uses to signify that there is something wrong. They are orange, amber, or yellow, and not to be ignored! The only way to “reset” the check engine light is by fixing the problem causing it. Thus, the 10 reasons I list below may help you reset your check engine light.

What does the wrench light mean on a Honda Accord?

What does the wrench light mean on a honda accord if you are trying to find what does the wrench light mean on a honda accord article and you fails to dwell right here you can see from several of the articles that may suit your needs right down below. What does the yellow wrench mean. Doublewide6 repairs llc 160710 views.

How do I reset the maintenance light on my Honda?

Then press and hold the trip reset button, insert the key and turn the ignition to the on position while holding the trip reset button in. After 10 to 30 seconds, the maintenance light should start to flash and when it stops, the light is reset.

What is the code on the Honda Pilot Check Engine light?

I ended up spending $0. However, if the check engine light, VSA light, and ABS light (sensor logic failure error code 84-01) persist, then take it into the dealer. I tried running a OBD2 code reader from Autozone, but it only indicates check engine lights, not ABS or VSA Honda DTS codes.

What is the oil pressure sensor on a Honda Pilot?

TSB 11-033. Link TSB 11-033, 2009-2011 Pilot, Oil Consumption MIL ON – HondaSUV Forums – Discussion forum and bulletin board for Honda CR-V, CRV, Element, Pilot, HR-V owners They ended up seeing a potential faulty oil pressure sensor on one of the spool valves for the VCM system.

How long was the Check Engine light on?

VTM-4 light was on for a day or so, check engine light was on for 3 days or so. All’s good now!:29: Apparently the misfires will cause the VTM-4 light and as soon as the engine starts to correct itself the VTM-4 light went out and eventually check engine light too. Man it ran like shat for a couple days though!

What are the warning lights on a Honda?

The following are warning lights and indicators found in vehicles built by Honda. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray).