What does the radiator do on a Dodge Neon?
A Dodge Neon’s radiator is responsible for both storing and, in part, cooling the antifreeze which circulates throughout the engine. The radiator’s efficiently is directly related to the radiator’s ability to circulate the antifreeze through the cooling fins within the radiator.
How to remove and replace a radiator support?
A 1996 Honda Accord was mainly used to demonstrate how to perform this task. Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like.
How do you remove transmission lines from a radiator?
Remove the automatic transmission cooler lines from the bottom of the radiator with a wrench, if applicable. Remove the lower radiator hose in the same manner used to remove the upper radiator hose. Remove the four radiator mounting bolts with a wrench. There is one mounting bolt at each corner of the radiator.
Where is the drain plug on a radiator?
Drain the radiator by turning the drain plug located at the bottom driver’s side of the radiator in a counterclockwise direction with a wrench. Remove the upper radiator hose by loosening the clamp on the end of the hose with a flathead screwdriver. Then pull the hose away from the radiator.
A Dodge Neon’s radiator is responsible for both storing and, in part, cooling the antifreeze which circulates throughout the engine. The radiator’s efficiently is directly related to the radiator’s ability to circulate the antifreeze through the cooling fins within the radiator.
Drain the radiator by turning the drain plug located at the bottom driver’s side of the radiator in a counterclockwise direction with a wrench. Remove the upper radiator hose by loosening the clamp on the end of the hose with a flathead screwdriver. Then pull the hose away from the radiator.
How do you remove the hose from a radiator?
Remove the upper radiator hose by loosening the clamp on the end of the hose with a flathead screwdriver. Then pull the hose away from the radiator. Disconnect the radiator fan plug from its electrical connection by tracing the length of the fan’s wire until the plug is reached. Then pull the plug out of its connection.
How do you disconnect a radiator fan plug?
Disconnect the radiator fan plug from its electrical connection by tracing the length of the fan’s wire until the plug is reached. Then pull the plug out of its connection.