What does shift solenoid A do 4L60E?

The shift solenoids within the 4L60E transmission receive instructions from the engine control unit to open and close. The E part of 4L60E means electronic; this transmission has electronic control. If one of the solenoids fails, all sorts of transmission problems can occur.

Is the GM 4L60E rear wheel drive transmission the same?

Are all 4L60E transmissions the same? The 4L60E transmission was found behind the majority of GM rear wheel drive vehicles for the almost 20 years. Are 4L60E transmissions the same?

How much fluid does a 4L60E transmission take?

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid,

What’s the difference between a 4L60E and a 96-99?

These have the classic 6 bolt bellhousing like the other classic transmissions that came before it. This version, as well as the 96-99 4L60E use a 298mm input shaft /torque converter. The major difference between the two-piece case 4L60E versions, is that the bellhousing bolts have slightly different patterns.

Why does my 4L60E have no reverse?

Slow, slipping or no reverse: “lo-reverse” clutches are worn out, fluid leak in the reverse apply circuit, or broken sunshell.

Are all 4L60E transmissions the same? The 4L60E transmission was found behind the majority of GM rear wheel drive vehicles for the almost 20 years. Are 4L60E transmissions the same?

Why are there no reverse gears on my 4L60E?

4L60E has forward gears, but no reverse This is also a pretty common issue with the 4L60E. More than likely the reverse input snap ring has sheared or snapped off. It can also be caused by the sun shell breaking.

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid,

Is the 4L60E transmission bellhousing the same?

4L60E transmission bellhousings are not the same. One of the main differences in the earlier and later 4L60E transmissions is the bellhousing area. In the earlier versions, the case was cast as on piece of aluminum. In the later versions of it had a removable bellhousing.