What does Milky transmission fluid mean?
The milky substance you are seeing on the transmission dipstick is a result of cross-contaminated coolant and transmission fluid. More than likely, your radiator has failed which has allowed coolant to enter the transmission system. When coolant enters the transmission, it will cause failure very quickly.
Why is there coolant in my transmission fluid?
Originally Answered: why is transmission fluid in my coolant? Your radiator is leaking internally, leaking transmission fluid from the transmission fluid cooler into the radiator where the coolant is. You can’t fix it, just get the radiator replaced and then flush the coolant.
How do you check the transmission fluid on a 2008 Acura TL?
How Do You Check Transmission Fluid?
- Turn your Acura on. You’ll want your engine warmed up, so you can best check the levels.
- Locate the transmission fluid dipstick.
- Remove the dipstick and touch the fluid.
- Get a rag and wipe off the dipstick.
- Use a funnel to bring the level up to full.
Can water mess up a transmission?
Water in the transmission fluid is highly destructive. Your vehicle’s transmission is made up of sensitive parts that quickly deteriorate when exposed to water. Contamination of the friction plates in the transmission will result in the transmission no longer being able to shift into any gears.
How do you know if there’s water in your transmission fluid?
One way that you can check to see whether your transmission has been damaged is to check the transmission fluid. If water has reached the transmission fluid, then it’s in the transmission system. Transmission fluid will usually be a bright red color, but if water has infiltrated it, the fluid will turn gray.
Can coolant affect transmission?
It may seem like a rather remote possibility, but engine coolant, or anti-freeze can get into automatic transmission fluid. The temperature of transmission fluid is regulated inside the engine cooling system. Any rupture of the internal radiator tank can allow coolant to mix with, and contaminate transmission fluid.
Does coolant run through transmission?
When the fluid passes through a small tank inside the engine’s radiator it cools the engine. If there was a rupture of the internal radiator tank can cause the coolant to mix with and contaminate transmission fluid. All transmissions have a cooling line that runs to the radiator.
How do you check transmission fluid on a Acura?
How to Check Your Transmission Fluid
- Turn on your car.
- Find the transmission fluid dipstick.
- Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
- Wipe off the dipstick with a rag, then place it back in the vehicle.
How often do you change the oil on an Acura?
Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy. 1: If message, SERVICE DUE NOW does not appear more than 12 months after the display is reset, change the engine oil every year. #: See information on maintenance and emissions warranty in your owner’s manual.
How often should you change your transmission fluid?
This requires transmission fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission fluid changed at 60,000 miles (100,000 km), then every 30,000 miles (48,000 km).
How does the maintenance schedule work on an Acura?
The Maintenance Schedule calculates service needs based on your car’s mileage. It checks engine-operating conditions and helps coordinate oil service dates and other maintenance check-ups. Prevent problems before they occur. Select Mileage…