What does it mean when your maintenance light blinks?
It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.
How long can you drive with maintenance required light?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How do you turn off the maintenance required light on a 2004 Honda Accord?
Turn the ignition back to the off position. Next, push the trip b button found on the odometer. Keep the button held down, while simultaneously putting Your ignition back into the on position. The maintenance light should now go off.
How many miles can I go over maintenance required?
The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset. Also, can you drive a car with 15 oil life? In reality, oil chnages in the worst case are generally rated for 3000 miles, and typically last 7500 miles in used reasonably on a normal schedule.
Why is my ” maintenance required ” light flashing on and off?
The maintenance required light may being flashing 500 miles before your car is due for service. The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights.
How to turn on the maintenance required light?
1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5. The maintenance required light will: – 5a. Illuminate solidly for three seconds – 5b.
How to reset maintenance required light on Toyota?
Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.
The maintenance required light may being flashing 500 miles before your car is due for service. The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights.
1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5. The maintenance required light will: – 5a. Illuminate solidly for three seconds – 5b.
Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.