What does it mean when a check engine light blinks 10 times?

A check engine light that flashes 10 times when you turn on the ignition simply means that the ECM has not run it’s emission OBD monitors. It is not really a code. After driving the truck for a while, the monitors will eventually run and pass.

What does it mean when your check engine light blinks 8 times?

If your Ford check engine light blinks eight times when you turn on the ignition, it means that it is not ready for State Emission Inspection, I/M test. This typically happens if the codes were recently erased with an OBD-II scanner or the battery was disconnected.

How many miles can you drive with a blinking check engine light?

The rule of thumb is that if the check engine light is flashing, you can’t keep driving the car. It’s an emergency. Often it indicates an engine misfire. If you keep driving, you will likely cause irreversible damage, mostly to the (expensive) catalytic converter.

What does a blinking check engine light mean on a ford?

If the check engine light in your Ford starts shining, that means that the problem needs urgent attention and your Ford should be brought in abruptly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

Why does my check engine light flash 10 times after key is turned on?

MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL.

What causes a flashing check engine light on a Jeep Wrangler?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Wrangler’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped. If you have VVT, it may be having issues.

Can you drive with a blinking check engine light?

How far can you drive with a blinking engine light? It is not recommended to drive at all with a flashing check engine light. You can, in most cases, drive the closest way to a repair shop. We do recommend towing it if the repair shop is located far away, though.

How can I read the trouble codes on my car?

To read the trouble codes from the engine control unit, you need an OBD2 scanner. You can either drive your car to a workshop and let a mechanic read the trouble codes from the engine control unit, or you can also do it yourself if you have a scanner.

What causes a blinking or flashing check engine light?

A blinking or flashing check engine light is always caused by misfires. However, it is not as simple as that because many different things can cause misfires. Here is a list of things that can cause a misfire, which may result in a blinking check engine light: Misfires on one or several cylinders (most common) Faulty spark plugs/Coils

How many times does engine light flash after key is turned on?

3000 RPM 1 trip less than 3000 RPM 2 trip. When Monitored: Under closed throttle decel and A/C off. ECT above 75°C (167°F). Engine start time is greater than 50 seconds. Set Condition: One of the CKP sensor target windows has more than 2.86% variance from the reference. One Trip Fault.

What causes a check engine light on a Dodge Ram?

There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Dodge Ram’s fuel system can often cause the engine to misfire. It can run too lean or rich.