What does Engine code P1457 mean?
Error Code P1457 is defined as Evaporative Emissions Control System Leakage EVAP Canister System. This error code is a manufacturer-specific trouble code, meaning it does not apply to all vehicles makes. Rather, it applies only to specific vehicle makes, such as Honda.
What is code P1457 on Honda CRV?
This is a trouble code for a leak in the evaporative (EVAP) system, the charcoal canister side of the system. Potential Causes: Restricted purge line, evaporative canister vent shut valve, bypass solenoid/two-way valve, purge solenoid and/or a leaking canister or evaporative hose.
How does Honda EVAP system work?
The EVAP system controls the pressure inside the tank with two valves on most Honda models. The other valve allows air into the tank to equalize pressure, or it can direct the vapors into the charcoal canister so they can be burned off later. This valve is called the canister control solenoid or valve.
What does code P145C mean?
|P145C Meaning The fuel vapor in the fuel tank is temporarily stored in the evaporative emission (EVAP) and introduced in the engine through the EVAP canister purge valve.
What does the p1457 code on an Acura mean?
P1457 ACURA Meaning. The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned.
How much does it cost to diagnose a p1457 code?
The cost of diagnosing the P1457 ACURA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour. When is the code detected? The P1457 code is detected when the EVAP system has a very small leak.
How does the EVAP system work in an Acura?
P1457 Acura Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned.
P1457 ACURA Meaning. The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned.
The cost of diagnosing the P1457 ACURA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour. When is the code detected? The P1457 code is detected when the EVAP system has a very small leak.
P1457 Acura Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned.
What to do if your Honda Civic says error code p1457?
Connect the rubber hose lines by opening the clamps with the needle nose pliers. Lift the car up using your floor jack. Remove jack stands. Lower the car to the ground. It is recommended to unplug your negative (black) terminal and reconnect it before starting the car.