What does a flash engine light mean?
1. Loose Fuel Cap. In many instances, a flashing check engine light doesn’t indicate that there’s something seriously wrong. Emission control sensors, for instance, will detect that there’s air in your fuel tank or fuel vapors are escaping, which would usually be caused by a fuel line leak or something even worse.
What kind of oil does a 1998 Acura CL take?
Engine Oil
| Viscosity: | 10W-30 (Above -7) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 4.2 quarts. . . . w/ofAfter refill check oil level. 4.5 quarts. . . (with filter)After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
What kind of oil does an Acura CL take?
Engine Oil
| Viscosity: | 10W-30 (Above -7) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 4.5 quarts. (with filter)After refill check oil level. 4.2 quarts. . w/ofAfter refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
What kind of engine does an Acura CL have?
The 1998 and 1999 models featured a 2.3 L ( F23A1) with 150 hp (112 kW). Both the 4-cylinder and 6-cylinder CL offered a “Premium” trim level which offered leather upholstery (with heated front seats in the 3.0), and in the 3.0, an Acura/Bose stereo.
Where to find diagnostic code for Acura check engine light?
1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the glove compartment. The connector has a removable cover. 2. Turn the ignition on. 3. Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s).
When did the Acura CL type’s come out?
In 2002, Honda Access America developed a performance package for the CL Type S, which was built in concert with tuning firm Comptech.
Where was the second generation Acura CL made?
With the advent of the 2nd gen TL in 1999, the transverse engined CL became more precisely a TL coupe. All Acura CLs were built at Honda ‘s plant in East Liberty, Ohio, which is also the plant that builds the Honda Civic.