What causes an AC clutch to stop working?
Some of the most common reasons AC compressors stop working include: Dirty condenser coils. Blocked suction lines. Low refrigerant charge.
Why does my AC compressor clutch not engage?
Why AC clutch won’t engage If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, or a low pressure lockout. AC compressor clutches receive power in a number of ways.
What should you do if your AC clutch is not engaging?
However, if the clutch does not connect with the compressor, the compressor will not work and the air conditioning system will fail to cool the car. Try checking if the clutch is in good condition by applying these steps: Turn the AC controls to maximum air conditioning.
How is the clutch connected to the AC unit?
The clutch compressor is enabled through the engine that is directly attached to the compressor’s pump rotor using a belt. However, most car AC systems now use an electromagnetic clutch piece that engages the compressor to spin the air conditioning unit.
When does the AC compressor clutch spin freely?
Should AC Compressor Clutch Spin Freely? The AC compressor clutch can spin freely when fully disengaged. It will also spin freely when the compressor and the pulley are engaged. However, if the AC compressor clutch spins freely every time, and the compressor fails to turn on, it is an indicator that it is not engaging, and it required replacement.
Why does my AC clutch not engage?
Why AC clutch won’t engage. If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, or a low pressure lockout. AC compressor clutches receive power in a number of ways.
How can I tell if my AC clutch is engaging?
Listen for any internal buzzing or clicking from the clutch. If the clutch fails to engage and spin, but you hear electrical buzzing or clicks inside, it indicates an internal clutch short. Listen for excessive bearing noise coming from the clutch or compressor.
Why won’t my a/C compressor clutch engage?
A compressor clutch that won’t engage can be caused by a lot of different issues, from a low refrigerant level to a blown fuse.
How do you replace AC compressor clutch?
How to replace an AC Compressor Clutch. To remove the clutch, screw in the removal tool and hold the clutch disc with the holding tool. Remove retaining nut on the compressor shaft while holding the clutch disc with the holding tool. Then install the clutch disc puller.