What can I do to improve the stability of my trailer?
In general, the load is secured as much as possible to accommodate stability. Trailer CG is another important consideration. In general, a lower center of gravity helps trailer stability. I once saw a trailer tip over around a corner because the CG was too high for the conditions. Where possible, load the trailer with the heavy items low.
How does a trailer affect your driveability and control?
When this condition is significant, it adversely affects stability, driveability, and control because weight lifts off the steering wheels. This may be an issue of the tow vehicle being too small for the trailer weight, or it may be loading incorrectly inside the trailer. Either way, at extremes, the situation is dangerous.
How does CG affect the stability of a trailer?
In general, the load is secured as much as possible to accommodate stability. Trailer CG is another important consideration. In general, a lower center of gravity helps trailer stability. I once saw a trailer tip over around a corner because the CG was too high for the conditions.
How does a dynamic load affect trailer stability?
Sources of Dynamic Loads vary, but they can have a significant effect on stability. For instance, if a large, heavy pipe is loose in a trailer, it will roll from side to side or front to back with motion of the road. This constantly changing load makes the trailer move.
What do you need to know about Trailer Stability Assist?
Trailer stability assist. Jump to navigation Jump to search. Trailer Stability Assist (TSA), also known as Electronic Trailer Sway Control, is designed to control individual wheel slip to correct potential trailer swing before there is an accident.
How does Vehicle Stability Assist ( VSA ) work?
It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output, and by selectively applying braking. When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times.
Where is the VSA system indicator light located?
This switch is under the left vent. Press it to turn the Vehicle Stability Assist system on and off. When VSA is off, the VSA Activation Indicator light comes on as a reminder. Pressing the switch again turns the system back on. Driving VSA SYSTEM INDICATOR Vehicle Stability Assist (VSA) System
Which is better for Trailer Stability Front or back?
Don’t put a lot more weight on one side or the other. Center the load on the trailer as much as possible. Secondly, load the trailer front to back with at least 10% of the trailer weight on the hitch. With typical trailers, more weight on the hitch is better for stability. 15% is usually a good number. To illustrate, think of 5th wheel trailers.