What are the warning lights on my GMC?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by GMC.

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Why does my check engine light come on?

Engine Warning (Check Engine Light) Your check engine light may appear for a variety of reasons. Sometimes, it can indicate a serious issue and require you to pull over immediately. This could indicate low oil pressure or overheating. Other times, this light will appear if your gas cap is open, loose, or cracked, causing fuel to evaporate.

When does the warning light on my car turn on?

Indicator light usually accompanied by another warning light and indicates that one or more warning systems have been detected. Click Indicator light will turn on when a new message is stored in the information display.

Why are the dashboard lights on my Chevy not working?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

What does the check engine warning light mean?

Engine/Check Engine Warning Light. What it means: The Engine/ Check engine light means that there is a problem with your engine. This light appears when there is a trouble code stored in your engine control unit. You can find this sign in a lot of different shapes like “Check Engine” and other informational texts.

What does the seat belt warning light mean?

The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts. In addition, if you are driving faster than 15 mph, an audible warning alert will sound.

What does the battery charging warning sign mean?

Battery / Alternator Charging Warning Sign What it means: This light indicates that a low voltage is detected. This light should be ON when the ignition is on but the engine off, but if this light appears when idling or driving, it means that the alternator is not charging your car battery properly, and your vehicle may stop suddenly.

What happens when the dashboard battery light comes on?

Your car can often run normally even if the dashboard battery light comes on because the car is capable of running off the energy that is already stored in its battery. The car, therefore, carries on running perfectly until its battery runs flat. After that, none of the car’s components will work.

What causes a battery warning light on the dashboard?

See how you can fix the battery warning light on dashboard with this five problem that you can look at. While the battery light might seem like there is a battery problem, but in fact there could be other numerous issue causing the battery light to activate. To see what is really wrong with the car see this video for things you can check.

What does service battery charging system mean on Silverado?

I own a 2007 Silverado and I have been getting the message ” Service Battery Charging System” along with the red battery display. This comes and goes but I have not noticed any performance lose.

What does a Cal warning light on the dash mean?

CAL stands for Calibrate. The IPC (instrument panel cluster) needs to be recalibrated. This could becaused by a battery/power spike, which means the IPC will need to relearn default settings, or therecould be an underlying problem. Technician will need to hook it up to a computer to analyze problem,and relearn settings.

When does a red warning light flash on a car?

We’ve shown it in red, which is used when a potential collision is detected. It will flash red as the condition worsens and/or when the relative speed between the two vehicles is great. although the symbol is that of the back-end of a car.

What does the temperature warning light mean on a car?

Temperature Warning Light symbol, indicates that the engine temperature is too high. You should stop the vehicle and turned off the engine as quickly as possible. Engine Oil Level or Oil Pressure Warning Light Symbol, indicate that the oil pressure is low. STOP driving immediately and turn the engine off.

When do the red lights on an off road vehicle illuminate?

The red bar of lights illuminates at the base of a vehicle’s windshield when a crash appears imminent, while the other lights illuminate when the system is manually turned off or if there is a fault with the system. A true off-road vehicle will be offered with a two-speed transfer case that includes a four-wheel low system.

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

What do the warning lights on a Hyundai mean?

1 Green: the system is working correctly or is currently in use 2 Yellow: something is not working correctly – take extra care and check it out as soon as possible 3 Red: there is a serious, and potentially dangerous problem – stop driving as soon as it is safe to do so

When does the warning light turn off on a Toyota?

If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off. The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating.

When do I lock my car the Light Never Blinks?

When I lock the car it is solid for a little bit and they starts blinking again. Just bought the car used yesterday and haven’t gotten through the whole book. The security system says a light will blink but doesn’t say it never goes out. Worried that if it never goes out it will eventually drain the battery.

Is there a relay switch for a 2003 GMC Sierra?

2003 GMC Sierra. The gauges do not work. All the lights on the panel work, just not the gauges. Is there a relay switch that pertains to the cluster?

Which is the diagnostic code for a GMC check engine light?

1 Refer to our Generic OBD II code list for definitions on all other GMC diagnostic trouble codes. 2 Manufacturer Specific Codes 3 P1031 4 P1032 5 P1105 6 P1106 7 P1107 8 P1108 9 P1109 10 P1111

Are there any GMC Sierras that do not work?

Some customers of 2003-2004 model year Cadillac Escalade, Escalade ESV, and Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, and Tahoe; and GMC Sierra, Yukon, and Yukon XL vehicles have reported that one or more of the instrument panel (IP) cluster gauges stick, flutter, or become inoperative.

What are the problems with a 2003 GMC Sierra 1500?

1 Bumpers Rusting Out Prematurely 2003 Sierra 1500 Average Cost to Fix: $1,500 Average Mileage: 10,000 mi 2 Instrument Cluster Failure 2003 Sierra 1500 Average Cost to Fix: $400 Average Mileage: 93,000 mi 3 Brake Lines Rusted 2003 Sierra 1500

How to fix a PRNDL light on a GMC Truck?

To fix this problem, remove the cluster from the vehicle. Then remove the instrument cluster housings, see the most current repair information for the vehicle you are working on. . Inspect the PC solder joints (circled area) carefully with a magnifying glass. Lookin for cracks in the solder at the top or bottom.

Why does my GMC ABS light keep coming on?

If the ABS dash light comes on and stays lit, and none of the ABS wires are damaged, it is likely that there is a partial failure in the ABS sensor. For specific information about GMC ABS braking systems, consult the particular vehicle’s manual (see Resources).

Why are the lights on my car not working?

If the switch, fuses, and bulbs are not to blame, you likely have a wiring or electrical issue and will need to take your vehicle to a certified mechanic for diagnosis and repairs.

Why are the lights on my dashboard not working?

Adjust the dial or knob to see if that fixes the problem. If the switch was accidentally bumped, your dashboard lights might have been turned off. Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb.

What was the name of the 1989 GMC Suburban?

R2500 SUBURBAN the USACanada R3500 PICKUP the USACanada S15 JIMMY the USACanada S15 PICKUP the USACanada SAFARI the USACanada TOPKICK the USACanada

Where can I buy 1989 GMC body parts?

RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. 1989 GMC Parts | RockAuto

Where are the electrical wires on a GM Truck?

Electrical issues suck. Click to expand… They are located behind the center dash bezel… the one with the ac vents. I am not sure if these are where the wires are originally located because i have an aftermarket stereo in my truck. I was actually trying to fix some issues with the stereo and that’s how I noticed these wires.

Are there any Chevy steering wheel lights left in stock?

NOCO Boost Plus GB40 1000 Amp 12-Volt UltraSafe Lithium Jump Starter Box, Car Battery Booster Pack, Portable Power Bank Charger, and Jumper Cables For 6-Liter Gasoline and 3-Liter Diesel Engines. . . . Only 2 left in stock – order soon.

When to replace a GMC Sierra 1500 part?

Usually the hardest part about maintaining a car or truck is searching for a reasonable source for outstanding parts. If your GMC Sierra 1500 needs maintenance, the optimum answer is installing a new first-rate replacement or OEM part to keep your car in the best shape.

What kind of steering wheel does Chevy have?

350mm 14″ Inch 5 bolt Grant Classic Nostalgia Style Wood Grain Steering Wheel Slotted 3 Spoke Steering Wheel Light Wood Grip and horn (14″ steering wheel)… . . Only 14 left in stock – order soon.

Why are the head lights on my GMC Sierra 1500 not working?

The headlight switch used on the GMC Sierra 1500 is known to fail through normal operation. Since the headlight switch is also integrated into the interior lights, a malfunctioning switch can cause issues with interior lights as well. Symptoms of a failed headlight switch include:

Where can I buy new GMC Sierra headlights?

GMC Sierra Headlights| AmericanTrucks Shop our selection of GMC Sierra 1500 Headlights. Get the look and utility you need with new Headlights at americantrucks.com. Free Shipping On Orders Over $75. Details Close AmericanTrucks is proud to offer FREE SHIPPING on any order over $75!

How much does a GMC Sierra tail light cost?

Bad grounding wires at the tail-lights, and dirty/corroded tow package wires can also lead to some of these issues. The average cost for a GMC Sierra 1500 General Diagnosis is between $88 -$111. Learn More

What kind of Dash covers do LMC trucks use?

The …1987-91 F100 F150 F250 Bronco Dash Covers The …1973-79 F100 F150 F250 1978-79 Bronco Dash Covers The …1992-96 F100 F150 F250 Bronco LED Instrument Panel Bulbs … Gives You Longer Bulb Life Dash Protector Prevents Fading and Cracking Shelf-It™ … The Ultimate in Organized Convenience Dash Protector …

Why are the dash gauges on my Chevy Silverado not working?

There are known issues with the gauges on the 03 silverado. Even though the cages appear analog, they are stepper motor controlled by the computer. This is a fancy way of saying digital. Check with the dealer about a recall! Since all gauges appear to have quit at one time I would agree with a previous post that the computer program is flawed.

Why is the message center not working on my 2003 Silverado?

An expert who has achieved level 1. An expert that has 1 follower. I have a 2003 silverado 2500hd and sometimes when I start the truck the message center won’t come on but if drive it about five miles and shut the truck off and start it again it will come on You can’t post conmments that contain an email address.

What does a GM dash without head up display look like?

Description: With head-up display, with keyless start titanium. Description: Without head-up display, without keyless start titanium. Description: Without head-up display, without keyless start black. Description: With head-up display, without keyless start cashmere. Description: With head-up display cocoa/choccachino.

What is the instrument panel number on a GM dash?

Instrument Panel Part Number: 23224749 Other Names: Dashboard Panel, Panel Replaces: 20989632

What is the language of the odometer on a 2003 Chevy Silverado?

The 2003 Chevy Silverado’s odometer warning cluster communicates in English by default. The personalization menu, however, allows the driver to change the display language to either French or Spanish. This can be helpful if someone is driving your truck and prefers one of the other languages.

What causes the Check Engine light to come on?

When your engine light comes on because of a weakness or failure in this system, you most likely won’t notice the car driving any differently. Everything will seem fine, except for the glowing check engine light on the dashboard. Missing or loose fuel cap. Incorrect fuel cap used. Evaporative (evap) emission canister or fuel tank leaks.

When to set the p0717 check engine light?

The PCM (powertrain control module) will set the P0717 code when it detects no signal from the input/turbine speed sensor. This signal may be interrupted briefly, or it may be erratic or otherwise outside of expected manufacturer settings. In any of these cases, the PCM will record the code and turn on the Check Engine light.

What does the check transmission warning light mean?

Warning Light While some vehicles may have an actual check transmission warning light, other cars and trucks may inform you of impending transmission problems by using an existing warning light — such as the overdrive, service or traction control lights. A transmission warning light may serve a double duty.

Many are related to the transmission. Your mechanic can perform a computer analysis that will reveal the problems that can be causing the Check Engine Light to come on in the form of alphanumeric codes known as P codes. The following are among the most common P codes: Your transmission is overheating.

What causes the transmission indicator light to come on?

Malfunctioning sensors will also give false readings causing the light to come on so always have the sensors tested again. One of the most common issues that causes this indicator light to illuminate is that the transmission fluid temperature is higher than normal.

What is the code for the Check Engine light?

Again, this is an informational code. With most vehicles, the TCM is the only computer that can turn on the check engine light. If there’s a problem preventing the light from coming on, you’ll see this code. The transmission range sensor tells the TCM the position of the gear lever.

When did the GMC instrument cluster get rebuilt?

This is a complete rebuild of the instrument cluster on 2003, 2004, 2005, and 2006 GM (Chevrolet, GMC, Pontiac, Hummer, Buick, Cadillac, Isuzu, and Oldsmobile) vehicles including Chevrolet Silverado, GMC Envoy, Trailblazer, Ranier, Suburban, Tahoe, & others.

Where are the fuses located on a Chevy Express?

Here you will find fuse box diagrams of Chevrolet Express 2003, 2003, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What is the ignition module on a Chevrolet Express?

Powertrain Control Module Ignition 1 (Gas), Engine Control Module, Transmission Control Module, Glow Plug Control Module Ignition 1 (Diesel) Truck Body Controller- Accessory (Gas), Truck Body Controller, Transmission Control Module Accessory (Diesel)

Are there replacement light bulbs for GM instrument clusters?

Add Needle Removal Tool? No Please contact us if you would like to purchase a different quantity than shown in the options above. These are TAE replacement light bulbs for nearly all GM & Chevy instrument clusters in 2003-2006 SUVs & Trucks.

What kind of light bulbs do I need for my Chevy truck?

These are TAE replacement light bulbs for nearly all GM & Chevy instrument clusters in 2003-2006 SUVs & Trucks. These instrument panel replacement bulbs come with square, plastic bases for ease of installation, and are similar in size to the original blue, square-base bulbs found in these gauge clusters.

What kind of bulbs do GM speedometers use?

Our TAE-manufactured GM instrument cluster bulbs will light up your speedometer like new again for many years to come. For a full repair, check out our 2003 – 2006 GM Instrument Cluster Repair service.

How do I unlock my 2016 GMC Sierra?

Press the Power Folding Mirrorbutton to fold or unfold the mirrors. See Keys, Doors and Windows in your Owner Manual. Unlock Press to unlock the driver’s door. Press again to unlock all doors and tailgate. Press and hold to lower all windows. Lock Press to lock all doors and tailgate. Vehicle Locator/Panic Alarm

How to adjust the lumbar support on a GMC Sierra?

Move the vertical control to recline or raise the seatback. C. Lumbar Adjustment Move the rear control to adjust the lumbar support. 1.Set Memory Positions With the vehicle in Park, adjust the driver’s seat, power outside mirrors and Fadjustable pedals to the desired positions. 2.

How do I get my GMC Sierra to remote start?

Press and hold to activate the alarm. The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on. Note: To change the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu. Remote Vehicle StartF

When does a running light turn off in a car?

Most daytime running lights are wired to turn off when the vehicle is no longer in motion, or when the key is removed from the ignition.

What are symptoms of bad or failing daytime running lamp module?

The daytime running lamp module is the computer that controls the daytime running lamps, and any issues with the module can cause the lamps to not function properly. Usually a bad or failing daytime running lamp module will produce a few symptoms that can alert the driver of a potential problem that should be serviced. 1.

What to do if your running light does not come on?

If your daytime running lights do not come on, stay on when the car is off, or produce a burning smell, you may have to replace their module. Daytime running lights are a safety feature found on many late model vehicles.

Why are the headlights on my GMC Sierra not working?

The time you react you will be off the road resulting in a crash, bringing injury or death to oneself or another occupant on the roadway. Lights or way to weak and not located in the right spot on truck making half your view in complete darkness when going up and down on hilly terrain.

Why is my stop light not working on my truck?

Note, on some trucks the stop light and the signal light will be shared. If the bulbs (lamps) are good, the problem may be a broken wire, or a poor connection somewhere. Check inside the bulb socket for corrosion, check the plug where the wires connect to the lamp circuit board for corrosion, etc.

Why is my turn signal not working on my GM Truck?

“No power coming out of BCM for turn signal-tested-found circuit 1334 yellow & black wire shorted to ground-found short located in underhood fuse block-replaced underhood fuse block.” My cost for repair: $600. However, a few weeks later, the left rear turn signal stopped working again. I took it back to the dealer.

Why does my GMC Sierra door not turn on?

It has been driving me nuts that when I would open the door on my GMC Sierra that the dome light would not turn on. It was simply the flat switch above the dome light knob left of the steering wheel. Like several others here, I had no idea it was a switch until I read this post.

Why are the interior lights not working on my car?

If your interior lights used to stay on for a while after closing your doors, then there is probably some kind of timer module in the circuit. So if your fuses are good, the door jamb switch checks out okay, and everything else seems to be in working order, you may be dealing with a more complex problem.

Why does my Silverado not turn the lights on?

No that turns all the door sensors on our off. Only my driver side rear door doesn’t turn the lights on when that door is opened all other doors including the rear tailgate hatch work. I need to know where the door switch is for one particular door…

What’s the flashing light on my GMC Truck?

Went to Fred Meyer’s earlier tonight and the truck was running great, no problems. Shut it off, went inside to shop, came back out afterwards, and then the fun started. I turned the key to on, and all the dashlights and heater and stuff came on, but when I turned it to start, nothing.

Why do my brake lights not work on my GMC Sierra?

I have a 1994 GMC Sierra C1500 2WD with 4.3l w/automatic. It was a fleet vehicle. Plain Jane accept for High Output Heater, Limited Slip Diff and Engine Block Heater. Brake lights were working intermittently. Would come on when pedal as first depressed then go out after pedal traveled down a bit. I put in a new switch and all was well for 3 months.

What to do if your GMC wont start?

You may also want to check the fuse (see “Fuses and Circuit Breakers” in the Index). See your dealer for service. Center. See “Roadside Assistance” in the Index. 1.) Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.)

How to start a car with a flashing security light?

Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position).