Was the 409 a good engine?

Chevrolet’s 348/409 engines were good performers and they were dependable engines. The zenith of W engine development came in 1963 in an almost mythical full-size one-year-only Chevrolet built strictly for drag racing, the Z-11 Impala.

Who made the car 409?

Chevrolet brought muscle car power to the people in the early 1960s, especially with the 1961 Chevrolet Impala SS 409. The mid-1961 introduction of the Chevrolet Impala Super Sport option package showcased another new arrival, the 409-cid V-8.

How much HP did the 409 have?

The top-trim versions of the street-car 409 churned out an astonishing 425 horsepower, while the Bill “Grumpy” Jenkins-tuned NHRA cars could run the quarter mile in under 13 seconds.

How much is a 409 motor worth?

A good deal would be $1200 – $2000.

What is the difference between 348 and 409?

There are a few visual differences that distinguish a 348 from a 409. The most obvious is the dipstick location. The 348 has it on the left, or driver side; the 409 has it on the right, or passenger side. However, since the pans are interchangeable, it’s a simple matter to make one look like the other.

Is a car a 409?

This full-size family car 409 did the quarter mile in 13.58 seconds at 105.88 miles per hour. This song describes the Bel-Air sport coupe version of the car equipped with the “4-speed, dual-quad, Positraction” equipment. It could do a 12.22-second quarter mile at 115 miles per hour.

What kind of car is the 409?

1961 Chevrolet Impala SS
The lyrics of the classic Beach Boys car tune She’s Real Fine My 409 are largely comprised of the phrase “giddy-up” – which, while perhaps less than imaginative in song-writing terms, isn’t at all inappropriate in describing a 1961 Chevrolet Impala SS loaded for bear with a 360-hp, big-block, 409-cubic-inch V-8.

When did Chevy stop making the 409?

This engine was superseded by the 409 cu in (6.7 L) as Chevrolet’s top performing engine in 1961 and went out of production for cars at the end of that year. It was produced through 1964 for use in large Chevrolet trucks.

What car is a 409?

1961 Chevrolet Impala SS 409 Everything started when Chevrolet decided to transform its 409 truck engine to use for passenger cars. They found out that the unit was extremely powerful and it could outrun all other cars on the road.

What years did they make the Chevy 409 engine?

409. A 409 cu in (6.7 L) version was Chevrolet’s top regular production engine from 1961 to 1965, with a choice of single or 2X4-barrel Rochester carburetors. Bore x stroke were both up from the 348 cu in (5.7 L) to 4.31 in × 31⁄2 in (109.5 mm × 88.9 mm).

How do you tell the difference between a 348 and a 409?

When did the Chevy 409 V8 come out?

Chevrolet 409 V8 Engine The Chevy 409 V8 was introduced in December of 1960 as the engine of choice for the all new 1961 Impala Super Sport. It was put into production by GM because of the performance ground that had been lost due to the new highly successful Ford 390 that had been gaining respect at the local race tracks the same year.

What kind of engine does a 348 409 have?

The 400hp 409 came with a single 4-barrel Carter AFB carburetor, and the 425hp 409 with 2 4-barrel Carter AFB’s. These same three engines were available for 1964 however it would be the last year for the 425hp version. In 1965 the 340hp and the 400hp 409’s were the only sizes available.

What kind of carburetor did a Chevy 409 have?

Chevrolet needed the 409 to keep up at the drag strips. There was only one version of the 409 in 1961. It was the 360hp. It was equipped with solid lifters, high lift cam, and a 4-barrel Carter AFB carburetor. In 1962, a 380hp could be had. More importantly the 409hp 409 with 2 4-barrel Carter AFB’s was now available.

How many horsepower does a 409ci engine have?

A factory, dual-quad equipped 409ci engine was only rated at 425 horsepower from the factory.” If you’re building a 348ci or 409ci engine, finding a set of stock heads can be an undertaking in futility. The heads have been used and abused, and not built since 1965.

What was the last year for the 409 engine?

The last year for the 409 was 1965 as GM was planning to unveil the Chevy 427 in 1966. Today these engines still bring a lot of respect because of the massive amount of torque and horsepower that people can get out of them by beefing them up with performance engine parts and other techniques.

What is the bore and stroke of a Chevy 409?

Bore and stroke was 4 1⁄8 in × 3 1⁄4 in (104.8 mm × 82.6 mm) , resulting in a substantially oversquare design. This engine was superseded by the 409 cu in (6.7 L) as Chevrolet’s top performing engine in 1961 and went out of production for cars at the end of that year. Nov 1 2019

What year did the Chevy 409 engine come out?

Chevrolet 409 V8 Engine. The Chevy 409 V8 was introduced in December of 1960 as the engine of choice for the all new 1961 Impala Super Sport. It was put into production by GM because of the performance ground that had been lost due to the new highly successful Ford 390 that had been gaining respect at the local race tracks the same year.

What is the firing order of a Chevy 409?

The firing order on both the 348 and 409 is the same: 1-8-4-3-6-5-7-2. Aftermarket Ignition With the advent of distributors without points, there are kits to convert the older GM Delco distributors from 1957 to 1974 to an electronic module version.