Is a Cavalier front or rear wheel drive?
The Cavalier first went on sale in May 1981 as a 1982 model with front-wheel-drive, a choice of two carbureted versions of the GM 122 series four-cylinder pushrod engines, and 2 and 4-door sedan, hatchback, and station wagon body styles.
Is a 2003 Chevy Cavalier front-wheel drive?
front-wheel Drive type.
Is a 2001 Chevy Cavalier front-wheel drive?
2001 Chevrolet Cavalier review: Our expert’s take The Cavalier, a front-drive compact, is General Motors’ best-selling car line, and it may continue in its present form until the 2004 model year.
Where are the tie rods located on a Chevy Cavalier?
by Jeffrey Caldwell. The Chevrolet Cavalier is a rear steer vehicle, meaning the steering gear and tie rods are located behind the steering knuckles. The rack and pinion unit is bolted to the firewall behind the engine.
How do you change the steering rack on a Chevy Cavalier?
Locate the lower pinch bolt on the steering rack’s flexible coupling and remove it. Separate the dash seal from the steering rack assembly. Remove the rack and pinion through the access hole in the left inner fender well. Reinstall the mounting studs that connect the steering rack clamps to the firewall if they were removed during disassembly.
Where is the rack and pinion located on a Chevy Cavalier?
The rack and pinion unit is bolted to the firewall behind the engine. If you begin to notice a distinct grinding or screeching noise whenever you try and turn the steering wheel of your vehicle, it may be a sign that your rack and pinion unit needs replaced. Disconnect the ground cable from the negative battery terminal.
What kind of signal does a GM steering wheel have?
The GM unit is a 5-volt dual analog triangle signal device with a valid signal voltage range of 0 to 5 volts. The sensors’ signal 1 and signal 2 voltage values will increase and decrease within 2.5- to 2.8-volts of each other as the steering wheel is turned. This information can be very useful during diagnosis.