How does torque work in a Dodge Neon?

Tie Rod End To Tie Rod Torque Arm To Engine Block Torque Arm To Transaxle Trailing Arm To Rear Knuckle Transaxle To Engine Block Transaxle/Transmission Oil Pan To Transaxle Wheel To Hub Wheel To Hub Wheel Speed Sensor To Brake Backing Plate

What are the gains on a Dodge Neon SOHC?

The other option is the Indy Intake manifold, which is also an awesome piece, netting gains of 25hp on a dohc with minimal bolt ons (intake, header, computer) and around 19 lb ft of torque on the same DOHC. SOHC gains are similar and also as impressive.

What kind of engine does a Dodge Neon have?

The Chrysler 2.0 liter engine was first used in the Neon; it was also used in the export PT Cruiser, Plymouth Breeze, and Dodge Stratus. Its ancestry can be traced back to the slant six, an engine known for its durability.

What kind of throttle body do I need for a Dodge Neon?

You should also look into an aftermarket Throttle Body (TB). For an “unmodded” 2.0 SOHC motor a 55mm TB is optimal for both air density and power. However, the TB’s that are most readily available are 60mm TB’s made by Lorenzo and MPx (the extra 5mm WILL NOT hurt performance).

How much torque does a hub bearing have?

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

What are the specs for a Dodge Neon?

Anti Roll/Stabilizer Bar To Cross Member 28.47 Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Lateral Link Anti Roll/Stabilizer Bar To Center Member

What is the anti roll stabilizer bar on a Dodge Neon?

28.47 Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Control Arm Anti Roll/Stabilizer Bar To Lateral Link Anti Roll/Stabilizer Bar To Center Member

How big are the bolts on a Dodge Coronet?

1957-77 DODGE ALL FULL SIZE (CORONET, MONACO,ETC.) Key Identifying Wheel Dimensions: Wheel Bolt or Lug Pattern (or bolt circle, lug circle, lug pattern, etc.) is the measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes. Bolt patterns can be 3, 4, 5, 6, 7, 8 or 10 lug holes.

What’s the bolt pattern on a 1998 Dodge?

Dodge – Vehicle Bolt Pattern Reference – Discounted Wheel Warehouse YEAR COMMENTS 1997 5 lug 4.5 inch or 114.3mm High Positive 1998 5 lug 4.5 inch or 114.3mm High Positive 1999 5 lug 4.5 inch or 114.3mm High Positive 2000 5 lug 4.5 inch or 114.3mm High Positive