How does an Acura MDX rear suspension work?

How does an Acura MDX rear suspension work?

Install the new one in its place and torque the two bolts to 47 ft-lb. To make it easier, you can jack up the rear axle a little, until you can easily slip the bolts into the holes. Install the wheels, then lower the car back to the ground. Figure 2. Acura MDX rear suspension diagram. Figure 3. Top shock bolt. Figure 4. Lower shock bolt.

How do you replace brake pads on an Acura MDX?

Using a Phillips screwdriver or impact driver, loosen and remove the rotor retaining screws. These are often corroded and tightly held in place, so a small application of penetrating oil and slight tap with a hammer will greatly aid in removal.

When to replace brake rotors and calipers on Acura RDX?

This article applies to the Acura RDX and MDX (2007-2015). While brake pads are expected to have a finite lifespan, brake rotors and brake calipers are also service items that RDX/MDX owners should be aware of.

How do you install a new rear axle?

Install the new one in its place and torque the two bolts to 47 ft-lb. To make it easier, you can jack up the rear axle a little, until you can easily slip the bolts into the holes. Install the wheels, then lower the car back to the ground.

When to perform routine maintenance on Acura MDX?

If you want to make sure your Acura MDX always drives like the first class luxury vehicle it was designed to be, get in the habit of performing routine maintenance at the factory recommended intervals. This article applies to the Acura MDX (2001-2016).

Do you need a drain bucket for an Acura MDX?

Acura MDX. To do yourself, you will need a socket set, oil filter wrench, and drain bucket. Keeping your engine well lubricated will allow your MDX to perform at its best. When the oil gets old, it breaks down more easily which, in turn, leads to it losing its lubricating properties.

What kind of oil does an Acura MDX use?

Engine oil will keep your engine lubricated. To do yourself, you will need a socket set, new filter, and drain bucket. Transmission fluid keeps the transmission itself cool and well lubricated, but it is also a hydraulic oil that is used to apply internal clutches, and transfer torque via the torque converter.