How do you reset the tire pressure light on a 2005 Chevy Suburban?

Turn ON the ignition, with the engine OFF. Apply the parking brake. Turn the exterior lamp switch from OFF to parking lamps 4 times within 4 seconds. A horn chirp will sound and the low tire pressure indicator will begin to flash indicating the learn mode has been enabled.

When does the tire pressure monitor automatically reset?

Starting in 2007, all Chevrolet Suburbans were equipped with a tire pressure monitoring system. Most systems automatically reset when it detects the tires are inflated to the proper level.

What does TPMS stand for in tire pressure monitoring system?

TPMS stands for “Tire Pressure Monitoring System” and it turns on whenever your car tires are irregularly inflated. However, a lot of drivers complain that TPMS warning light keeps blinking even after they have filled your tires to the proper tire pressure.

How to check tire pressure on a suburban?

Open your driver’s side door and inspect the door jamb to find the tire specification sticker. This sticker lists the recommended inflation setting for your Suburban’s tires, which will vary from vehicle to vehicle depending on the tire size. Unscrew the valve stem caps and apply the tire pressure gauge to determine the current inflation level.

When does the service tire monitor system message appear?

The Service Tire Monitor System message can appear on the driver information center (DIC). The DIC displays this alert when it detects an issue with the tire pressure monitor system (TPMS). When the TPMS issue is resolved, the alert will go away. Was this answer helpful? Thank you for your feedback! Sorry about that.

How can I disable the tire pressure monitoring system?

How can I disable the tire pressure monitoring system? Get a PVC tube and cap both ends. Install a air fitting on one side. Put all your tpms sensors inside and pressurize it to whatever pressure is needed and put it under your seat. I’ve heard of people doing this with the nissans.

What does the service tire monitor light do?

The service tire monitor light is a warning bulb connected with the TPMS or Tire Pressure Monitor System, which notifies the driver of low or high air pressure in the tires.

Is there a service tire monitor on a GMC Sierra?

The joys of owning a GMC Sierra or Silverado are endless. There are many things to look forward to if you are choosing to be the proud owner of a GMC Sierra or Silverado. You can bet that the Service Tire Pressure Monitoring System dash warning light will come on at some point.

How to check tire pressure on a Chevy Silverado?

Take an air pressure gauge and measure all the tires, making sure they reflect the correct PSI numbers. Use an air compressor to fill each tire to their recommended psi. Figure 1. Check the air pressure. After refilling the tires to their recommended air pressure, the TPMS sensors may need to be reset. Move on to Step 2 to learn how.