How do you reset the service indicator on a Mercedes E350?
How to Reset Oil Life: Mercedes-Benz E350 (W212) 2009-2016
- Turn the ignition to position 1 (one position before starting the engine).
- Press and hold phone button and press and hold down the OK button within 1 second.
- Select ASSYST PLUS and confirm with OK button.
- Select FULL SERVICE and confirm with OK button.
How do I turn my Mercedes service light off?
Press the “Down” button until you highlight “Service due.” Press the “OK” button. Press the “Down” button until you highlight “Full service.” Press the “OK” button. This should reset your service indicator light.
How do I reset the service indicator on a Mercedes E class?
Mercedes-Benz E-Class: How to Reset Your Service Indicator
- Step 1 – Turn ignition to position “1”
- Step 2 – Scroll to the “Trip” option.
- Step 3 – “Accept” a phone call.
- Step 4 – Press the scroll forward button.
- Step 5 – Restore to “Full Service”
- Step 6 – Reset the service indicator.
How do you reset the check engine light on a 2008 Mercedes E350?
Locate the reset button on the left side of the instrument cluster. Press the reset button and hold it until the display reads “To reset: Press reset button for 3 seconds.” Push the reset button again and hold the button in until the display indicates that the system has been reset.
How do you reset the service light on a Mercedes E class?
How do I reset the service light on my Mercedes?
To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button.
How to reset service indicator on Mercedes Benz E-class?
Setting the multi-function display. Hold the “Accept Phone Call” button located on the right side of the steering wheel. While holding the button down and within five seconds, press and hold the “OK” button on the left side of the steering wheel. Figure 3. Hold “Accept Phone Call” and “OK” buttons.
How to reset service Engine Soon ( SES ) light?
Press and Hold the Accelerator Place your foot on the accelerator and press it in, but this time, do not release, hold it there for ten seconds. During this step, the SES light will start to flash. 5. Release the Accelerator Release the accelerator pedal after the 10 seconds and see the engine light still blinking. 6. Turn OFF the Ignition
How can I Turn Off the Check Engine light?
The simplest and the safest way to turn off check engine light soon is by using an OBD2 scanner which can be obtained from any auto shop. The scanner will retrieve the error code and clear it completely. 1. Connect the Scanner Below the steering column, you will find the scanning interface.
How to reset Mercedes E class service light at home?
How To Reset Mercedes E Class Service Light at home! How To Reset Mercedes E Class Service Light at home! Use the UP and/or DOWN buttons to scroll through the information center to display the mileage/kilometer counter Press the FORWARD and/or BACK buttons repeatedly until the menu item Trip with highlighter is shown
How do you reset the service indicator on a Mercedes?
Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6.
Where is the service menu on a Mercedes E class?
Press right side scroll FORWARD or BACK buttons (located on the right side of steering wheel) to display the “Service Menu”. Use the “+” and/or “-” buttons to highlight the “Confirmation” option and press the right SELECTION button (located on left side of steering wheel)
How to reset ” service B ” on Mercedes C230?
1 Close all doors, hood, and trunk lid and turn the ignition to position II (ON) 2 Press the main menu PAGE buttons repeatedly to display the main trip/temp menu 3 Press the UP and/or DOWN arrows to scroll through the sub-menus to display the FSS (Flexible Service System) menu