How do you reset the PassLock system on a 1999 Chevy Cavalier?

How do you reset the PassLock system on a 1999 Chevy Cavalier?

The passlock reset procedure is listed below. 30 Minute Re-Learn Procedure. 1. Turn ON the ignition, with the engine OFF. 2. Observe the Security light, after approximately 10 minutes the light will turn off. 3. Turn OFF the ignition, and wait 5 seconds.

How to replace a belt tensioner on a 99 Chevy Cavalier?

How to Replace a Belt Tensioner on a 99 Chevy Cavalier. 1 Step 1. Open the hood, and prop it up. Move to the front passenger side of the engine, and locate the spring-loaded belt tensioner above the 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

Why does my PassLock not work on my car?

The following information can help to determine the cause of the problem. The PASSLock system does not disable the starter; it only disables the fuel after the engine has started. If the vehicle will not crank, PASSLock cannot cause this condition. If the vehicle starts, but stalls quickly, this condition can possibly be related to PASSLock.

Is there a way to bypass PassLock on a Chevy?

NewRockies.com has a solution for how to fully bypass the PassLock system in GM cars. This problem has popped up in the following Chevrolet generations. Most years within a generation share the same parts and manufacturing process. You can also expect them to share the same problems.

What is the system fault code for PassLock security?

When the sensor defect starts, it usually presents itself as system fault code B2960. A red (or yellow) “security” warning light will stay illuminated and the engine will either a) never start or b) start for a moment and then shut down.

The following information can help to determine the cause of the problem. The PASSLock system does not disable the starter; it only disables the fuel after the engine has started. If the vehicle will not crank, PASSLock cannot cause this condition. If the vehicle starts, but stalls quickly, this condition can possibly be related to PASSLock.

NewRockies.com has a solution for how to fully bypass the PassLock system in GM cars. This problem has popped up in the following Chevrolet generations. Most years within a generation share the same parts and manufacturing process. You can also expect them to share the same problems.

When the sensor defect starts, it usually presents itself as system fault code B2960. A red (or yellow) “security” warning light will stay illuminated and the engine will either a) never start or b) start for a moment and then shut down.

How long does it take to reset PassLock on a Chevy?

Reset security system on chevy, buick, oldsmobile, cadillac, pontiac, saturn, hummer. Make sure the battery if fully charged because this procedure may take up to 30 minutes and you cannot start the vehicle during this time. The instrument panel cluster (IPC).