How do you reset the maintenance required light on a Acura?

How do you reset the maintenance required light on a Acura?

Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start engine. Hold the SELECT and RESET buttons until the indicator resets, 10 seconds. Turn ignition off and then start the engine to verify the indicator has been reset. Turn the key to off position.

How do you reset the maintenance light on a 1998 Acura Integra?

Reset oil service light Acura Integra

  1. Reset the indicator by inserting the key in the slot below the indicator. Or.
  2. Turn ignition to (II) do not start the engine.
  3. Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.

How do you reset the maintenance required light on a 2001 Acura CL?

How To Reset Acura CL Maint Req’d Light in 3 Easy Steps!

  1. Turn the ignition switch to the OFF (0) position.
  2. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
  3. Hold the button(s) for 10 seconds or until the indicator resets.

How do you reset the maintenance light on a Acura Integra?

Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off. Turn the ignition off and then start the engine to verify the indicator has been reset. Reset the coloured indicator by inserting the key in the slot below the indicator.

How do you reset the maintenance light on a 1994 Acura Integra?

1994-2001

  1. Find the maintenance reminder unit (normally located inside the lower dash cover under steering column)
  2. With the car in park and the ignition switch in the ON (II) position, press the reset button on the unit and hold it for more than 3 seconds.
  3. The reminder light will then go OFF.

How to turn on the maintenance required light?

1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5. The maintenance required light will: – 5a. Illuminate solidly for three seconds – 5b.

How to reset maintenance required light on Toyota?

Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.

How to reset the maintenance required light on a Lexus?

Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.

What’s the difference between a check engine light and maintenance required light?

Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.

1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5. The maintenance required light will: – 5a. Illuminate solidly for three seconds – 5b.

Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.

Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.

Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.