How do you reset the maintenance required light on a 2005 Toyota Sienna?

Step-By-Step Instructions

1. Turn the Key to the “Off” Position.
2. Press and Hold the “Odometer Trip Reset” Button.
3. While Holding, Turn the Key to the “On” Position.
4. Continue holding the “Odometer Trip Reset” button until the “Maintenance Required” light blinks several times and turns off.

How do you reset the maintenance required light on a Toyota Sienna?

Press and hold the trip meter reset nob (next to your Toyota Sienna’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Sienna. Hold the meter reset until the MAINT REQD light switches off.

Is the maintenance required light the same as check engine?

Most modern-day vehicles have two different lights within the dash: a maintenance required light, and a check engine light. However, the maintenance required light is entirely different than the check engine light.

How do you reset the maintenance required light on a 2006 Toyota Sienna?

How to Reset the “Maintenance Required” Light on My 2006 Toyota Sienna Van

1. Start your car and wait for the LCD odometer display to come up to the left of your steering wheel.
2. Turn off the car, and hold down the odometer button.
3. Wait for the maintenance light to blink and go out, while still holding down the button.

What does the maintenance required light mean on a Toyota Sienna?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.

Can I drive with maintenance required light on?

Yes, but do so with caution. This light is typically on to remind you that it’s time to change the oil or clean the filter in your car – ignoring it won’t impact your ability to drive, but the longer you leave old oil, the more strain you’re putting on the engine.

Why is my maintenance required light on after oil change?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

Does maintenance required light mean oil change?

The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop.

What does it mean when maintenance required light is on Toyota?

MAINT REQD
The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.

What does maintenance required mean on a 2004 Toyota Sienna?

When engine oil needs to replace, the MAINT REQD light will appear on display. So if you do see that light come on, most any Toyota or Lexus product, as most of them use maintenance require lights it typically means that you need to have an oil change.

How do I reset maintenance light on 2004-2015 Toyota Sienna?

To turning off the Maintenance Light on 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015 Toyota Sienna, conform to the following instructions: Turn the ignition switch to the “On” position, but do not start the engine Press the odometer button until you see “ODO” (for 2004-2010 models) or “TRIP A” (for 2011-2015 models)

How to reset maintenance required light in a Toyota?

Reset the maintenance required light in a Toyota after you change your oil so you know when to do your next oil change. This process works on most Toyotas including Camry, Tacoma, Corolla, Avalon, Tundra, Sienna, Rav4, 4Runner, and many more. Step 2: Hold down the “reset trip” button and shut the car off.

When does the reqd light come on in a 2006 Sienna?

Sometimes, after changing the oil in your 2006 Sienna, you may notice that the MAIN REQD light is still on. The light, which indicates when you need an oil change, typically comes on approximately every 5,000 to 7,500 miles. To turn the light off, you need to reset it by following a few easy steps. Step 1

What happens when you reset the maintenance required light?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.

To turning off the Maintenance Light on 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015 Toyota Sienna, conform to the following instructions: Turn the ignition switch to the “On” position, but do not start the engine Press the odometer button until you see “ODO” (for 2004-2010 models) or “TRIP A” (for 2011-2015 models)

When to reset service indicator light on Fiat Grande Punto?

After the maintenance is performed, the service indicator needs to be reset so the computer can track when the next service is due. A Fiat dealer will reset the service indicator if it performs the maintenance. If you do the maintenance yourself, you can reset the light manually.

How to turn off maintenance light on Toyota Tundra?

If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.

What kind of car is the Toyota Sienna?

Toyota Sienna is the flagship minivan or MPV class in America. Toyota recently released their latest family car, the Sienna 2015, which will go into the world automotive market. This time I will share how I reset the maintenance light on the Toyota Sienna.