How do you reset the airbag light on a Volkswagen?

How do you reset the airbag light on a Volkswagen?

How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

How do I reset my solid airbag light?

What would cause the airbag light to come on?

Your Airbags May Not Deploy In The Event Of A Crash The airbag light is an indicator that there is a problem with the vehicle’s Supplemental Restraint System. When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision.

Can you reset the airbag warning light?

It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.

How do I turn off the airbag light?

How to Turn Off the Airbag Light

  1. Turn on the ignition switch with your car key.
  2. Wait for the airbag warning light to turn off.
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.

Is it safe to drive with airbag light on?

Is it safe to drive with an SRS light on? It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.

How much does it cost to reset the airbag light?

Number 1 — Reset Airbag Light This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.

Can a blown fuse cause the airbag light to come on?

Blown fuses can definitely cause the airbag light to come on. When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

Is it okay to drive with the airbag light on?

Will disconnecting the battery reset the airbag light?

Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.

How much does it cost to fix the airbag light?

The average airbag sensor cost is $250 to $350 for the sensor part. If you are planning on having a mechanic replace the sensor then you are going to have to pay the mechanic a labor cost as well so keep that in mind. If you are able to replace the sensor yourself then you should be able to save yourself some money.

What should I do if my airbag light is on?

The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.

How do you turn off the airbag light?

The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.

Why does my airbag light keep turning on?

You have to use a scan-tool and remove the soft-code error to switch it off. Low car battery could trigger the airbag light to turn on. The spring does the job of maintaining the continuity between the driver seat’s airbag and electrical wiring.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Tsukasa Azuma is an awesome car blogger of Car From Japan. He owns a car repair shop at downtown Osaka, and he put all that experience to good use in his sharing posts.

How to reset VW Golf Mk5 airbag light?

Re: How to reset VW golf mk5 airbag light?. The light will reset when the fault that turned it on is diagnosed and repaired. At this time your airbags are disabled, drive carefully. You can’t post conmments that contain an email address.

Why does the airbag malfunction illuminate in Volkswagens?

The warning light could illuminate after the car has been in a flood, or if there is corrosion in the car’s computer, so the airbag isn’t read properly. A water leak or something similar could cause the computer to corrode. What Should I Do If The Airbag Light Illuminates On Your Volkswagen?

How can I reset the airbag light on my car?

Repeat the first few steps two more times and you will see that you have reset the airbag light on the dash. You will know that it is reset once the light comes on and turns off. It will not flash. And that’s how you reset an airbag light. If only all your DIY projects could be this easy.

How long does the airbag light stay on?

To start the process get your watch ready and turn the ignition switch from “Off” to “On.” Once the airbag light comes on it will stay on for a total of seven seconds. Once it turns off, you will have a second to turn the ignition back to “Off.” After you have the ignition off for three seconds, you will need to turn the key back “On.”