How do you reset a fuel pump switch?

How do you reset a fuel pump switch?


  1. Turn the ignition switch OFF.
  2. Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank.
  3. If no leakage and/or odor is apparent, reset the switch by pushing the reset button on the top of the switch.

Where is the fuel pump inertia switch located?

In the event of an accident, an inertia switch may trip, isolating fuel pump operation. Once the switch has tripped it must be reset before attempting to restart the engine. The inertia switch is located behind the trim on the left-hand side of the vehicle, forward of the front door post, below the fascia.

What can cause a fuel pump to not turn on?

If either due to a faulty crank sensor, or ecu, the crank sensor signal is not being read, the ignition and fuel pump systems will not power up. Also, a faulty ignition module can create the same issue. Check for signals from the crank sensor and other sensors.

How do I know if my inertia switch is bad?

Usually a bad or failing fuel pump shut off switch will produce a few symptoms that can alert the driver of a potential issue….Symptoms of a Bad or Failing Fuel Pump Shut Off Switch

  1. Engine suddenly stops while driving.
  2. Switch that trips for no reason.
  3. No start condition.

How can you tell if fuel pump is not working?

A simple method to check if a fuel pump is turning on is to listen for it. Open the fuel door, remove the fuel cap (if your car has one), and turn the car’s ignition to “On.” Put your ear next to the fuel door and listen for a humming noise. If you don’t hear any noticeable action, the pump is likely not working.

Where is the reset button on a fuel pump?

Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case. You may need to turn the ignition key to the on or accessory position to energize the module and reset the switch.

How to reset the fuel switch on a Ford?

FORD FUEL RESET SWITCH LOCATION. FORD DOES NOT START FIX. HOW TO RESET FUEL SWITCH – YouTube If playback doesn’t begin shortly, try restarting your device.

Where is the fuel pump shut off switch located?

On Ford, Peugeot, VW, Citroen, Vauxhall, Subaru, Renault, Toyota and Mazda, inertia switch location is usually on one of the following two hidden places: Behind or below glove compartment, sometimes hidden under the carpet; On the driver side, between the footrest area and door, sometimes hidden under the carpet.

How can I reset the fuel cut off?

This is similar to an electrical circuit breaker in your home which can be easily reset by pushing the button or pulling the leverage down. All modern fuel injection cars are equipped with an inertial fuel cut off switch that shuts off the power supply for the fuel pump if the vehicle is in a collision.

Where would we find the reset switch for fuel pump?

Open your Town Car’s trunk. Look on the driver-side trunk hinge. Mounted on this hinge, you’ll find your fuel-pump reset switch. The button is labeled “Reset.” Turn your key to “Off” and take it out of the ignition. Return to the trunk area and press the “Reset” button firmly.

Where do I find the fuel pump reset button?

The fuel pump shut-off switch is located in the driver’s foot well, behind the kick panel. The reset button for the fuel pump shut-off switch is accessible through an opening in the kick panel. Use the following procedure to reset the fuel pump shut-off switch. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If

Where is the fuel pump reset switch located?

Reset the fuel pump cut-off switch by pressing the small, round button, located near the passenger-side kick panel, underneath the right-side portion of the glove compartment. Switch the ignition to the “ON” position. After a few seconds, switch the ignition back to the “Off” position and check your vehicle for fuel leaks.

Where is the fuel pump reset button?

Locate the reset button to the fuel pump shut off switch. Press and hold the reset button for about 20 seconds. Note: The fuel pump shut off switch reset button is usually located either under the dash in the driver compartment or under the driver or passenger seat.