How do you remove a radiator from a car?

How do you remove a radiator from a car?

Grasp the clamp and slide it up the radiator hose. Grasp the hose, where the radiator hose meets the hose nipple, and pull the hose off the radiator. Loosen the fittings of the transmission cooling line using a wrench.

How to remove a radiator from a Class A motorhome?

Remove the clamp that connects the upper radiator hose to the top of the radiator. Grasp the upper radiator hose and pull it away from the radiator. Remove the clamp that connects the radiator to the hose of the coolant reservoir. Remove the hose.

Where is the drain on a car radiator?

Turn the drain valve to the open position. The drain valve is located near the bottom of the radiator. Allow the fluid to drip into the drain pan. When fluid stops draining, turn the valve to the closed position. Slide the drain pan toward the passenger side of the car.

Can a radiator support be cut out and replaced?

Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like. If you know someone who needs to see it, share it. Leave a comment below with your thoughts.

How to remove and replace a radiator support?

A 1996 Honda Accord was mainly used to demonstrate how to perform this task. Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like.

Is it hard to replace a radiator hood?

Replacing fenders and hoods are really not that hard as long as you have something that is straight and lined up to bolt them to. The hardest part about replacing a radiator support is cutting the welds. First you have to find and identify all the spot welds you will need to cut out. Then there is the physical work itself.

Do you need a welder to replace a radiator?

Most all car radiator supports are welded in and this often deters your Do-It-Yourselfers from tackling this type of job. Now granted, not everyone has a welder and that can be a big factor of not wanting to try it but most tool rental places rent MIG Welders and that is what you would need to do this job.

Replacing fenders and hoods are really not that hard as long as you have something that is straight and lined up to bolt them to. The hardest part about replacing a radiator support is cutting the welds. First you have to find and identify all the spot welds you will need to cut out. Then there is the physical work itself.

How to remove transmission cooler lines on a Chevy Silverado?

It takes time for vibrations, corrosion and things like that to damage them. In this case, the project vehicle is a 1995 Chevrolet Silverado with a 5.7l V8, but the process is similar for other Chevys. Pop the hood and unbolt the top of the grill from the core support using a 1/4-inch ratchet and socket.

How do you drain coolant from a radiator?

Drain Point – Locate the drain point on the radiator 8. Drain Coolant – Drain the coolant from the system 9. Circulate Water – Run engine with distilled water and flush 10. Fill Coolant – Dilute coolant with distilled water and fill

How do you remove a radiator from an RV?

Disconnect the harness from the radiator. Grasp the radiator’s sensor bracket and pull it off the radiator. Grasp the radiator with both hands and pull it off the radiator support. Do not drive your RV without a radiator. “The RVer’s Bible: Everything You Need to Know About Choosing, Using, & Enjoying Your RV “; Kim Baker and Sunny Baker; 1997

How to replace GM radiator Silverado Suburban, suburban?

(Playback ID: O5zAAVUv2RduWJBk) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What’s the hardest part of replacing a radiator?

The hardest part about replacing a radiator support is cutting the welds. First you have to find and identify all the spot welds you will need to cut out. Then there is the physical work itself. Most radiator support have at least 20 welds that have to be cut out and this can get monotonous and tiring.

Many radiators can be removed by lifting up and out of the vehicle, but some need to be removed from underneath the vehicle. Set the new radiator in place, and then reattach all the previously removed parts. Start with the radiator mounting bolts and finish with the radiator reservoir hose.

How long does it take to replace a radiator?

Replacing a radiator can take most of a day, but, with care and patience, it is is doable. In order to replace a radiator, you’ll need to drain the old radiator, detach any the parts keeping it in place, remove it, install a new radiator, re-install any parts that were removed, and add coolant.

Is it dangerous to replace a radiator in a car?

Wait until the engine is cold before proceeding. This job can be dangerous, so be extra careful. You will encounter sharp edges and other circumstances that could cause injury. Protect yourself by wearing quality safety gloves and goggles. Be watchful of any moving items while working.

Can a car jack be used to replace a radiator?

You’ll need to raise the vehicle so you can access your radiator. You can use a car jack and stands to keep the vehicle up, but remember to put a chock behind the wheels and engage the parking brake. Wait until the engine is cold before proceeding. This job can be dangerous, so be extra careful.

Many radiators can be removed by lifting up and out of the vehicle, but some need to be removed from underneath the vehicle. Set the new radiator in place, and then reattach all the previously removed parts. Start with the radiator mounting bolts and finish with the radiator reservoir hose.

Replacing a radiator can take most of a day, but, with care and patience, it is is doable. In order to replace a radiator, you’ll need to drain the old radiator, detach any the parts keeping it in place, remove it, install a new radiator, re-install any parts that were removed, and add coolant.

You’ll need to raise the vehicle so you can access your radiator. You can use a car jack and stands to keep the vehicle up, but remember to put a chock behind the wheels and engage the parking brake. Wait until the engine is cold before proceeding. This job can be dangerous, so be extra careful.

Step 1: Raise and support the vehicle. Safely support the vehicle by jacking it up and supporting it with jack stands. Place a wheel chock behind the rear wheels and set the parking brake. Step 2: Drain the coolant from the radiator. Open the petcock valve or remove the lower radiator hose to drain the coolant from the radiator.

When did the GM Vortec V8 radiator get replaced?

An error occurred. Please try again later. (Playback ID: 17pR9PA1W5FKG7U-) An error occurred while retrieving sharing information. Please try again later.

How do you drain radiator coolant in Chevy Silverado?

After reattaching the lower hose, remove the upper hose and start the truck. While in the cab, turn on your heater to hot. Run water from the garden hose into the coolant reservoir tank, and run the engine until clear water begins to run from the top hose.

Turn the drain valve to the open position. The drain valve is located near the bottom of the radiator. Allow the fluid to drip into the drain pan. When fluid stops draining, turn the valve to the closed position. Slide the drain pan toward the passenger side of the car.

When to remove a radiator from an RV?

You might want to remove a radiator when replacing one that’s malfunctioning, or if you are storing the RV for an extended period of time. Slide a wide drain pan under the RV, on the driver’s side. Turn the drain valve to the open position.

How do you remove a radiator hose from a truck?

Figure 1. Squeeze the spring clamp together with your pliers, and then pull off the hose. Removing the cap from your coolant reservoir will allow air in, which helps smooth the flow of coolant from the radiator and hose. After reattaching the lower hose, remove the upper hose and start the truck. While in the cab, turn on your heater to hot.