How do you hook up subs to a factory radio?

The Installation Process of a Powered Subwoofer to a Factory Stereo

1. Step 1: Place your sub in your vehicle.
2. Step 2: Disconnect the battery.
3. Step 3: Run your amp wire.
4. Step 4: Run the turn-on wire and signal cables.
5. Step 5: Connect the ground wire.
6. Step 6: Handle the wiring connections.
7. Step 7: Get into the music.

Can you install subs on a stock stereo?

Can you Hook a Sub to a Stock Stereo. So, getting right to the question of can you hook subs to a stock stereo, the answer is yes you can. It is actually a good way to get a sound boost from your radio without having to give up the familiar controls.

Why is my sub not working?

Check to make sure that cables are firmly connected and plugged into the correct spots. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.

Can I put a subwoofer in my car without an amp?

Can I Connect a Subwoofer Without an Amp will the sub work? You can install and hook up a subwoofer without connecting an external amplifier to power it up. This can be done by disconnecting the rear speakers and using the channel outputs to be bridged for one large power output to one none powered subwoofer.

Do I need an amp for a subwoofer?

Subwoofers are designed to increase the bass frequencies, resulting in a deep, thumping sound. In most cases, they are paired with an amplifier to boost the sound. If you do not have the funds for both components, you can still hook up a subwoofer without an amplifier; it simply involves a little more know-how.

How do I connect subwoofer to speaker level output?

How to Connect a Subwoofer to Speaker Level Outputs

1. Check the specifications on your receiver.
2. Check the specifications on your subwoofer.
3. Use two speaker wires to connect to the front and back of the sub on the left and right audio channels.
4. Adjust the filter on the subwoofer to clarify the audio.
5. Enjoy the bass.

Can I connect subwoofer without amp?

Can subwoofer run without amp?

You can’t do it without amplifier. Subwoofers require high power for functioning. You can’t just plug them into your car stereo\player. For playing subwoofer you would require minimum a 2-channel amp.

How do you check a subwoofer without an amp?

If you are wondering how to test a subwoofer without a car amp it can be done by using a fresh 9 volt battery. By doing this, you can determine if the subwoofer is blown or not by seeing if the cone moves upwards when connected and downwards when disconnected.

Do you need to wire an amplifier to a sub?

If you’re installing a subwoofer in your vehicle, you’ll need to wire up your audio system to the amplifier before connecting your subwoofer. This will involve disassembling your dashboard and running multiple wires from the head of your vehicle to the sub in the trunk or under your front seat.

Where to put subwoofers in a car amplifier?

You may also be able to fit the subwoofers underneath the driver’s seat or in another location. Note that, for the best sound quality, the amplifier should be as close to the subwoofers as possible. Some subwoofer systems include a built-in amp, making this less of a problem.

Can a subwoofer be added to a factory stereo?

Video not available. Adding a subwoofer to your factory stereo is a great way to improve your sound without giving up your familiar factory controls. In this video, you can follow along as one of our experts installs an amplifier and subwoofer in a car with a factory stereo. You’ll see all the basics of amplifier installation, including:

Where is the best place to install an amplifier?

Good locations to install an amplifier include: Pros: You can use short wires and patch cords. You won’t have to remove a seat or climb into the trunk. Cons: Only very small amps fit here. This puts your amp close to some common noise sources. Pros: Plenty of room for large amps. Near the rear speakers.

How to install an aftermarket subwoofer and amplifier?

The time came to install an aftermarket amplifier and subwoofer in my M to compliment the factory sound system. Here are the instructions to do this as I remember them. As has been noted before in other threads leaving the rear ANC (Active Noise Control) microphone hooked up negatively affects the sound output of the new subwoofer.

Good locations to install an amplifier include: Pros: You can use short wires and patch cords. You won’t have to remove a seat or climb into the trunk. Cons: Only very small amps fit here. This puts your amp close to some common noise sources. Pros: Plenty of room for large amps. Near the rear speakers.

Where do I Run my Loc / DSP and AMP?

Cut in half and run each 20ft lenth to the backseat for your LOC/DSP and amp output, respectively. Amp power ran down passenger channel, both speedwires down driver side. Pages with related products. See and discover other items: Best line output converters for amp, Explore wiring harnesses for subwoofers]

Can a subwoofer amplifier be mounted upside down?

Never mount an amp upside down, as dissipated heat will radiate back into the amp. Make sure there’s enough room for you to connect the wiring and adjust the controls (gain, crossover, bass boost, etc.). A compact subwoofer amplifier mounted in an out-of-the-way nook in a trunk with plenty of air space for cooling