How do you change the CARB on a Camaro?
Finally, run a line from the pressure port on the AFPR to the carb. Remove the hose that’s on the line going to the charcoal canister (remove the whole canister if you want), clamp a length of 3/8″ hose onto the end of the hard bent line, and rout it out of the engine compartment somewhere. Mine exits in front of the left tire.
What kind of engine does a 1991 Camaro have?
The RS base-engine was changed to the LH0 V6, upgrading from the 2.8 LB8 to the 3.1 LH0. 1991 Camaro Engines – Welcome Back Z28. While the IROC-Z was no longer offered, the Z28 made a welcomed return. Although very few changes were made (mostly cosmetic), the Z28 was still an IROC with a stout choice of engines.
What kind of engine did Camaro have in 1983?
1983/1984 Camaro Engines – Second Gen Sophomore Blues The carbureted Iron Duke 4-cylinder engine was dropped for 1983, but the TBI LQ9 version was retained as the base engine for the sport coupe. The rest of the lineup remained the same with one addition.
Do you need an aftermarket Camaro ignition module?
There are basically 3 options for this, junkyard, remanufactured, or an aftermarket. GM used the one you need from 74 to around 83 I believe. I used an Accel aftermarket one. It needs to be complete with the Firebird or Camaro ignition module, wiring harness, cap, rotor, and coil.
Finally, run a line from the pressure port on the AFPR to the carb. Remove the hose that’s on the line going to the charcoal canister (remove the whole canister if you want), clamp a length of 3/8″ hose onto the end of the hard bent line, and rout it out of the engine compartment somewhere. Mine exits in front of the left tire.
Where does fuel delivery go on a Camaro?
One is fuel delivery, one fuel return, and the other goes to the charcoal canister behind the headlights. The fuel delivery line is slightly thicker than the return. Go to your local hardware store and buy some 3/8″ pipe thread to 3/8″ hose nipple fittings, and put one in each port of the AFPR with a good coat of thread sealant.
There are basically 3 options for this, junkyard, remanufactured, or an aftermarket. GM used the one you need from 74 to around 83 I believe. I used an Accel aftermarket one. It needs to be complete with the Firebird or Camaro ignition module, wiring harness, cap, rotor, and coil.
When did the Chevy Camaro get a manual transmission?
This engine was only available with a manual transmission in 1983. Due to its late introduction, 3,223 L69 V8s were sold for the 1983 model year. Transmissions were upgraded for 1983.