How do you change struts on Acura MDX?

How do you change struts on Acura MDX?

Front Shocks

  1. Step 1 – Jack up the front. Jack up the front of your car and remove the wheels.
  2. Step 2 – Disconnect end link, speed sensor and brake line.
  3. Step 3 – Remove lower bolts.
  4. Step 4 – Remove nut covers.
  5. Step 5 – Remove three top nuts.
  6. Step 6 – Swap over spring and strut mount.
  7. Step 7 – Replace the strut.

How much does it cost to replace struts on Acura MDX?

The average cost for an Acura MDX suspension shock or strut replacement is between $1,534 and $1,617. Labor costs are estimated between $317 and $399 while parts are priced at $1,217.

Can I replace shocks and struts myself?

Strut Replacement Replacing struts used to be a dangerous job for a DIYer. But these days you can buy a complete strut assembly that eliminates the strut/spring/mount disassembly process. These assemblies allow you to replace both of your front struts yourself in less than two hours.

Is it hard to replace shocks and struts?

Getting Started. Make sure you need new shocks. Your car may even have a combination, using shocks in the front and struts in the back. Struts can be difficult to replace, so it’s best to let a professional handle that job.

What kind of suspension does Acura MDX have?

active suspension
The MDX does still have an active suspension that allows the suspension to adapt and can also be changed by the user. The active suspension of the MDX has two modes: sport and comfort.

What Bilstein shocks do I need?

Bilstein B6 and B8 are uprated shock absorbers. If you are looking to improve the vehicle handling you should consider B6 or B8. If you want to retain the vehicle ride height or you do a lot of towing and want a firmer rear suspension the B6 is for you. If you have a lowering springs fitted to your car you need B8.

How long do Acura MDX struts last?

Struts may need to be replaced anywhere between 50,000 and 100,000 miles. If the struts start leaking, or become broken or damaged, they should be replaced immediately.

Will new shocks make ride smoother?

Shocks and struts help keep the vehicle stable during acceleration and braking. The customer may think that new shocks and struts will simply make their ride smoother, but the truth is that new shocks and struts can do a whole lot more. New shocks and struts can make a vehicle corner and brake like when it was new.

What platform is the Acura MDX built on?

The MDX was the first crossover SUV to have third-row seating, and shares its platform with the Honda Pilot. The Pilot is available with a seven or eight person seating configuration, while the MDX exclusively seats seven, with two seating positions in the third row.

Does Acura MDX have air suspension?

The Acura MDX is not offered with an air ride suspension option like some other luxury cars. The MDX does still have an active suspension that allows the suspension to adapt and can also be changed by the user. The active suspension of the MDX has two modes: sport and comfort.

How do you replace shocks on an Acura MDX?

The MDX is a heavy vehicle and the springs are pretty stout, so you will need a heavy duty spring compressor in order to take the tension off of them. Use an impact gun to take the nut off the top of the strut, then remove the strut mount. Install the old spring on the new strut. Install the hat on top and tighten the nut in the center.

How do you replace a rear shock absorber?

Center rear jack point. The rear shock absorbers are very easy to replace. Simply remove the two bolts, the one on top and the one on the bottom of the shock absorber, then remove the shock absorber. Install the new one in its place and torque the two bolts to 47 ft-lb.

What’s the best way to remove a strut?

Use your 14mm socket and extension to remove the three nuts holding the top of the strut in place, there in the holes you just pried the covers off of. You will likely need an extension to reach them. Remove the shock by moving the bottom out of the bracket, then pull the whole thing down.

The MDX is a heavy vehicle and the springs are pretty stout, so you will need a heavy duty spring compressor in order to take the tension off of them. Use an impact gun to take the nut off the top of the strut, then remove the strut mount. Install the old spring on the new strut. Install the hat on top and tighten the nut in the center.

Is there a problem with the Acura MDX?

There might be corrosion. There is a very large design flaw on the MDX electronic strut system that can sometimes allow moisture to seep in and corrode the sensors. You can check the top of each strut mount and visually inspect for any corrosion.

Center rear jack point. The rear shock absorbers are very easy to replace. Simply remove the two bolts, the one on top and the one on the bottom of the shock absorber, then remove the shock absorber. Install the new one in its place and torque the two bolts to 47 ft-lb.

How do you replace a spring on a strut?

Use an impact gun to take the nut off the top of the strut, then remove the strut mount. Install the old spring on the new strut. Install the hat on top and tighten the nut in the center. Carefully remove the spring compressor. Now your new struts can be installed. Figure 10. Be extremely careful when working with the spring compressor.