How do you change an alternator on a Toyota?

How do you change an alternator on a Toyota?

Instructions

  1. Remove wiring harness and move out of the way.
  2. Remove battery cable connection.
  3. Remove connector on backside of alternator.
  4. Loosen 12mm bolt below alternator to loosen belt.
  5. Remove 14mm bolt that pivots alternator.
  6. Work alternator back and forth to get it loose and remove.

How do you remove an alternator from a HiAce?

If it has got power steering it is a bitch to get out.You have to remove power steering pump.To do this you have to take the pulley of the pump to remove the bolts from the pump. Also had to remove pump and alternator brackets. I vaguely remember having to remove the pump a few years ago just to get a new alternator belt on it.

Can a Toyota pickup alternator be removed without problems?

The actual removal and install, can be handled without problems. The procedure before, and following, will allow the unit to be removed, replaced, and operational. A little lesser known fact… Most of the procedure was done using my left hand only. I am right handed, and that hand was operating the camera. Loading…

What’s the best way to replace an alternator?

There’s a 90-degree twist in the middle of the Cross Force wrenches, so you end up pushing on a flat surface. The result: we could push harder without discomfort. So we just laid into it and the belt came free. Once the belt is off just remove whatever bolts connect the alternator to the bracket and you’re good to go.

Can a HiAce alternator be removed from a Land Rover?

If u want to go on an expedition get a Land Rover, if u want to come home from an expedition get a Landcruiser! Just eyeball it. Firstly get the battery terminal off, belt adjustment loose, belt and plugs/connections off and take a moment to take a look around.

If it has got power steering it is a bitch to get out.You have to remove power steering pump.To do this you have to take the pulley of the pump to remove the bolts from the pump. Also had to remove pump and alternator brackets. I vaguely remember having to remove the pump a few years ago just to get a new alternator belt on it.

The actual removal and install, can be handled without problems. The procedure before, and following, will allow the unit to be removed, replaced, and operational. A little lesser known fact… Most of the procedure was done using my left hand only. I am right handed, and that hand was operating the camera. Loading…

If u want to go on an expedition get a Land Rover, if u want to come home from an expedition get a Landcruiser! Just eyeball it. Firstly get the battery terminal off, belt adjustment loose, belt and plugs/connections off and take a moment to take a look around.

How do you remove radiator from Toyota HiAce?

Or can be done with big head screw driver (but car for the trims for it can get damaged) Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well.