How do you change a thermostat on a 2000 Chevy Cavalier?

Remove the bolts that hold the thermostat housing onto the intake manifold with a box wrench. With the bolts removed, lift the housing off the intake. Lift the thermostat out of the intake manifold and throw it away. Place a new thermostat into the intake manifold with the end marked “top” sticking out of the intake.

Where is the thermostat located on a 2001 Chevy Cavalier?

2.4L… where is the thermostat and/or water pump location on a 2001 chevy cavalier w/a 2.4L engine? They are both in the back of the engine below the exhaust manifold.

Where is the thermostat located on a 2003 Cavalier?

Where is the thermostat located on a 2003 cavalier? Follow the upper radiator hose to the block. right there on the block will be your thermostat housing, take off this housing and you will see the thermostat make sure to remember which side the spring is facing.

How much is a thermostat for a 2002 Chevy Cavalier?

2002 Chevrolet Cavalier Thermostat – from $6.99+ | AutoZone.com.

How do you change a thermostat on a 2002 Chevy Venture?

2 Answers

1. Remove the air cleaner and duct assembly.
2. Drain the coolant until the coolant level is below the thermostat.
3. Remove the crossover exhaust pipe.
4. Remove the radiator hose from the thermostat housing.
5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.

Where is the thermostat located on a 02 cavalier?

The thermostat is in the lower radiator house in the 2.2 liter Cavalier. Untwist the radiator cap slowly. Do not remove the radiator cap or attempt to replace the thermostat on a hot engine.

Where is the thermostat located on a 2000 Cavalier?

On the 2.2 engine it is right at the top of the engine, in the front next to the exhaust manifold. On the 2.4 it is at the rear of the water pump, in the bottom. Remove the bolts that hold the thermostat housing onto the intake manifold with a box wrench.

Where is the thermostat in a 1999 Chevy Cavalier?

Thermostat is located at the motor’s end of the top radiator hose. Make sure your vehicle’s motor is not hot, before opening the cooling system.

How do you change a thermostat on a 2003 Pontiac Sunfire?

Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket.

Where is the thermostat located on a Chevy Venture?

The thermostat sits behind the housing. The housing will need to be removed to gain access.