How do I unlock my GM touch screen radio?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do you unlock a stock Chevy radio?

How do you unlock the radio on a Chevy?

How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Step 3: Press the AM/FM button. Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.

How to reset the radio on a 2004 Chevy?

Turn the radio on by pressing the “power button” on the radio console. Wait until the radio flashes “CODE” on the display screen. Press in the code on the radio console number pad. Wait for the display screen to stop reading “CODE” and return to a normal display.

How do you change the radio number on a GM car?

Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds. The radio display changes from LOC to a three-digit number. Write this number down. You will then have fifteen seconds max before the next step must be performed.

How to reset an anti-theft radio on a Chevy?

Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.

Can you replace the radio knob on a 1997 Chevy Silverado?

The actual radio knob was slightly too short and wouldn’t stay on. So, I had to carefully use a tiny bit of super glue to keep it in place. All the other replacement knobs fit fine. And yes, they were used on the original radio that came in my 1997 1500 Chevy Silverado truck. If you found this review helpful, please click on the button below.

Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.

What kind of Radio is in a 1998 Chevy Silverado?

See and discover other items: chevy silverado radio, silverado radio, 1997 gmc, 1998 silverado, cadillac part, 1998 chevy silverado parts

Why is my Chevy TheftLock radio not working?

The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.