How do I reset my Audi A4 TCM?

Reset Audi ECU / Transmission

1. Press the gas pedal to the floor.
2. Turn on the ignition but do not start the engine.
3. Keep the gas pedal pressed for at least 15 seconds.
4. Turn off the ignition.
5. Drive your Audi carefully and allow it to change gears at low RPM for the first 10 minutes.

How do I read Audi error codes?

When a warning light pops up on your Audi, you can use an OBD-II scanner to read the codes….Diagnose Audi Airbag Warning Light

1. Plugin scanner into the OBD-II port.
2. Turn on ignition.
3. Turn on the scanner.
4. Select your Audi model from the menu.
5. Select SRS/Airbag control unit.
6. Select Read Fault Codes from the menu.

Where is fault memory located on an Audi?

The engine control module (ECM) fault memory can only be accessed and erased using diagnostic equipment connected to the data link connector (DLC): o A4/RS4/S4 2000-+, A6/S6/RS6/allroad 1997-> A8/S8 2002 -> fascia, driver’s side [1] o Cabriolet – in underhood fusebox/relay plate [2]

What are the OBD codes for an Audi?

All Codes OBD Codes About OBD2 Nonsense Codes OBD2 Sensors PXXXX UXXXX BXXXX CXXXX Search for:Search Audi>> AUDI (1995 – 2008) Model:

Why is my airbag not reporting part number?

However, the Airbag is not reporting a part number. This is what your report shows: module itself might not be to factory design. A few things that come to damage control modules. Component Protection: Active code. Component Protection is something that only the dealer can resolve.

What kind of module is the airbag module?

The Airbag module is a UDS version. The Engine Control Module is also a UDS type module. With these types of modules, VCDS has to identify the module into something useful for us to look at. However, the Airbag is not reporting a part number. This is what your report shows: module itself might not be to factory design. A few things that come to

What are the common problems with an Audi A4?

Common Issues. 1 Bad Water Pump. Water pump problems have been commonly reported on the this model of Audi A4. The best way to detect early signs of water pump failure 2 Engine Oil Deposits. 3 Speed Wobble.

The engine control module (ECM) fault memory can only be accessed and erased using diagnostic equipment connected to the data link connector (DLC): o A4/RS4/S4 2000-+, A6/S6/RS6/allroad 1997-> A8/S8 2002 -> fascia, driver’s side [1] o Cabriolet – in underhood fusebox/relay plate [2]

What causes speed wobble in Audi A4 B8?

As well, make sure you are using only premium-quality engine oil in your reservoir. A frightening occurrence, speed wobble is a temporary loss in the control of your vehicle. It is commonly caused by hard braking. However, in the B8 Audi A4, the problem is highly common and most frequently associated with a faulty power steering hose.

What do you need to know about the A4 B8?

Here’s what you need to know. This article applies to the B8 Audi A4 (2008-2015). The B8 Audi A4 is a beautifully engineered compact executive vehicle with an impressive track record for delivering high performance, top speed, guaranteed longevity and increased fuel economy.