How do I permanently disable anti-theft system?

In order to deactivate the anti-theft system, car owners must press the unlock button located on the remote key. So it is suggested to use the key to unlock the door, then change the switch of ignition to “on” position.

How do I disable my Chevy SECURITY system?

Thankfully this is an easy fix.

Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
Look at the dashboard and locate the theft system light.
Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do you bypass the SECURITY system on a 2001 Chevy Blazer?

Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY telltale light, after approximately 10 minutes the telltale light will turn OFF. Turn OFF the ignition, and wait 5 seconds .

Why is my security indicator light flashing?

The flashing key — or sometimes a car outline with a key inside of it — is the security indicator light. This light flashes when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security system(s) equipped on the vehicle are operational.

How do I know if my PASSLock is activated?

Most PASSLock-equipped vehicles have a telltale indicator in the instrument panel. When a PASSLock-equipped vehicle is being started, the instrument panel warning light for PASSLock remains on until the engine starts.

How to deactivate the anti theft system on GM cars?

How to deactivate the anti-theft system on GM cars 1st WAY TO FIX IT ALL THESE STEPS MUST GET DONE USING YOUR CAR KEY. 1. lock the door 2. unlock the door 3. open it 4. shut it 5. lock the door again 6. wait about 20 seconds • This will shut the alarm off and reset the system.

How to take anti-theft off a car radio?

Turn the key into the “On” position. The “Theft System” light begins flashing on the dashboard. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off. Flip the key into the “Off” position and leave it there for five seconds.

How to permanently disable and remove GM security systems?

GM Security Systems are killing cars all over North America and the only final solution is to disable and remove them permanently. This is what NEWROCKIES Inc is all about.

How do you fix a car theft alarm?

ALL THESE STEPS MUST GET DONE USING YOUR CAR KEY. • This will shut the alarm off and reset the system. 1. unlock the door with your key, open the door and leave it opened! 1. Disconnect the battery for 15 minutes. If the Theft System light disappear, you might be fine for few days, months, but it will not get rid of the problem. 2.

How to bypass factory theft on a GM vehicle?

This is a really unique security system bypass kit that you can use to override your current factory theft system on your GM vehicle. You can get this kit from New Rockies.com . I came across this site surfing the net when I was having a similar issue on a GM vehicle.

How can I disable my anti theft system?

You can use best obd2 scanner to find the code and fix problem. Another tip you can use to try to disable your anti-theft system is to use the key in the door. You want to make sure to use the driver side door and the physical key to having a chance of this working.

Why is my car anti theft system not working?

Sometimes a little bump on your vehicle can make it think that someone is trying to break into it, but really it was just an accident. If that is the case pressing the alarm button on your key remote will reset it. Sometimes though the anti-theft system is malfunctioning and being triggered for a different reason.