How do I know which cam sensor is bad?

How do I know which cam sensor is bad?

If your vehicle idles roughly, stalls frequently, has a drop in engine power, stumbles frequently, has reduced gas mileage, or accelerates slowly, these are all signs your camshaft position sensor could be failing.

Is it hard to change a camshaft sensor?

It may be easiest to remove and replace the camshaft sensor from under your vehicle, but it can also be done from the top by removing the air filter housing.

What is the camshaft position sensor on a Pontiac?

On some Pontiac models the camshaft position sensor is part Ignition Control Module (ICM) (aka igniter). If playback doesn’t begin shortly, try restarting your device.

Where is the low coolant sensor on a 1999 Pontiac Grand Prix?

If it is not low, then you may have a level sensor problem. 1999 Pontiac Grand Prix need to know where the low coolant sensor is. The light flashed low coolant all the time and it has plenty of coolant and its not running hot at all. The low coolant level sensor is in the passenger side of the radiator.

How to test the cam sensor in GM 3.1L?

TEST 3: Making Sure The CMP Sensor Is Getting Ground. More GM 3.1L, 3.4L Test Articles. You can find this tutorial in Spanish here: Prueba: Sensor De La Posición Del Árbol De Levas (P0341) (at: autotecnico-online.com ). You don’t need any expensive tools to test the cam sensor on your 3.1L or 3.4L V6 engine. Multimeter.

Where is the camshaft sensor on a 3800 V6?

On the 3800 V6, the camshaft position sensor is located behind the water pump pulley. If you were to look at the pulley straight on, it is at about the 9 o’clock position.

If it is not low, then you may have a level sensor problem. 1999 Pontiac Grand Prix need to know where the low coolant sensor is. The light flashed low coolant all the time and it has plenty of coolant and its not running hot at all. The low coolant level sensor is in the passenger side of the radiator.

TEST 3: Making Sure The CMP Sensor Is Getting Ground. More GM 3.1L, 3.4L Test Articles. You can find this tutorial in Spanish here: Prueba: Sensor De La Posición Del Árbol De Levas (P0341) (at: autotecnico-online.com ). You don’t need any expensive tools to test the cam sensor on your 3.1L or 3.4L V6 engine. Multimeter.

How to test the camshaft position sensor p0341?

Testing the camshaft position sensor and/or diagnostic trouble code (DTC) P0341, on your 3.8L V6 equipped GM car or mini-van, is an easy test that can be done using only a multimeter. No scan tool is needed for this test!

How is the cam sensor on a car activated?

The camshaft position (CMP) sensor is activated by a magnet on the camshaft gear (this magnet is known as the camshaft position sensor interrupter). As the cam gear turns and this magnet passes the camshaft position (CMP) sensor, it activates the cam sensor.