How do I find my cars computer code?

How do I find my cars computer code?

Follow these 4 steps to insert and read the OBD scanner:

  1. Step 1: Locate your vehicle’s OBD port.
  2. Step 2: Plug your OBD scan tool into the connector.
  3. Step 3: Read the codes in the computer.
  4. Step 4: Record the codes that display.
  5. Step 1: Break down your code into sections.

Where is the diagnostic port on a 2005 Dodge Stratus?

The OBD2 port is in the passenger compartment. It is in the drivers footwell. It is either right next to the hood release on the left side or on the right side in front of the gas pedal.

How do you read a Dodge engine code?

How To Read Dodge Check Engine Light Without a Code Reader

  • Cycle the Key from OFF to ON three times.
  • The last cycle the key should be in the ON position.
  • It will give the code in the odometer LCD window on the dashboard.
  • The code will show for only a moment and flash P-done before going back to normal.

How do you read engine codes?

  1. How to read OBD codes: Preparation.
  2. Step 1: Plug the OBD scanner into the OBD port.
  3. Step 2: Turn on the ignition.
  4. Step 3: Enter the Vehicle Identification Number.
  5. Step 4: Find OBD codes in the menu.
  6. Step 5: Interpret the first character of the OBD code.
  7. Step 6: Interpret the second character of the OBD code.

How do you read a diagnostic code?

How to know if your Stratus has computer trouble code?

You have now accessed your Stratus’s computer trouble code memory. Watch for the Check Engine light on the instrument panel to begin flashing. Count the number of times the Check Engine light flashes before pausing and record the number, which will be a single-digit number.

Where to find check engine light codes on Dodge?

These are listed in numerical order for easy searching. When retrieving Dodge check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

What’s the OBD-I system on a Dodge Stratus?

Chrysler continued to use the OBD-I system along with the second generation in many of its vehicles, including the Dodge Stratus. Place your transmission in park (automatic) or neutral (manual). Start the engine and then race it up to 2500 rpm. Gradually, bring the engine speed down to idle again.

Where can I find the OBD2 code for a Dodge?

Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles. . Engine control module (ECM) -RAM read/ write error

Where are the trouble codes stored on a Dodge Stratus?

Trouble codes stored in the computer of the first generation OBD system may be accessed through different methods, depending on the particular make and model. Chrysler continued to use the OBD-I system along with the second generation in many of its vehicles, including the Dodge Stratus.

Chrysler continued to use the OBD-I system along with the second generation in many of its vehicles, including the Dodge Stratus. Place your transmission in park (automatic) or neutral (manual). Start the engine and then race it up to 2500 rpm. Gradually, bring the engine speed down to idle again.

These are listed in numerical order for easy searching. When retrieving Dodge check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles. . Engine control module (ECM) -RAM read/ write error