How do I enter immobilizer code?

Enter the code as follows:

1. Using the key, turn the. driver’s door lock (clockwise),
2. Enter the FIRST digit of the code. If the first digit is 4, turn the.
3. Enter the SECOND digit of the code.
4. Enter the THIRD digit of the code.
5. Enter the FOURTH digit of the code.
6. Finally, turn the key to the.

What is the cancel code on an Acura?

Customer advised to have a key cut from a regular key blank and enter the cancel code using the ignition switch and foot-operated parking brake as follows: Example – cancel code is 54345. a) Insert the new key in ignition switch and turn to ON (II) position. Indicator light flashes continuously after the initial 2 sec. indication.

Can a 2003 Acura RL start without a transponder?

Keep in mind, this information was obtain referring to a 2003 ACURAL RL, but may work with other model years. A special, electronically coded key prevents the car from being started, even if a mechanical duplicate of the proper key shape is used. A transponder, built into the key, signals the immobilizer control unit that the key is genuine.

What are the keys on an Acura 3.5RL?

This is how the immobilizer system works. The 3.5RL is supplied with three keys and a key number plate: 1. A master key (black) for ignition switch, door locks, glove box and trunk lock. 2. A valet key (grey) for ignition switch and door locks. 3. A packaged learning key (red) for re-coding the immobilizer system only.

Where is the transponder code on an Acura?

The key’s transponder code is registered in the immobilizer unit of the vehicle. If this signal is correct, the immobilizer control unit will connect the starter and PGM-FI circuits when the ignition is switched ON. Important: The learning key (red) will not start the engine and must only be used for re-coding the system.

Customer advised to have a key cut from a regular key blank and enter the cancel code using the ignition switch and foot-operated parking brake as follows: Example – cancel code is 54345. a) Insert the new key in ignition switch and turn to ON (II) position. Indicator light flashes continuously after the initial 2 sec. indication.

Keep in mind, this information was obtain referring to a 2003 ACURAL RL, but may work with other model years. A special, electronically coded key prevents the car from being started, even if a mechanical duplicate of the proper key shape is used. A transponder, built into the key, signals the immobilizer control unit that the key is genuine.

This is how the immobilizer system works. The 3.5RL is supplied with three keys and a key number plate: 1. A master key (black) for ignition switch, door locks, glove box and trunk lock. 2. A valet key (grey) for ignition switch and door locks. 3. A packaged learning key (red) for re-coding the immobilizer system only.

Can you cancel the Immobilizer on an Acura?

Yes, only temporarily in an emergency situation, if the customer has lost his key (s) and the car must be moved. Important: To maintain security of the vehicle, the immobilizer cancel function can only operate with a special VIN based cancel code which can be obtained from The Acura Tech Line.