How do I check my error code?

1. How to read OBD codes: Preparation.
2. Step 1: Plug the OBD scanner into the OBD port.
3. Step 2: Turn on the ignition.
4. Step 3: Enter the Vehicle Identification Number.
5. Step 4: Find OBD codes in the menu.
6. Step 5: Interpret the first character of the OBD code.
7. Step 6: Interpret the second character of the OBD code.

Does AutoZone check free codes?

AutoZone gives you a FREE, easy-to-read MYZONE HEALTH REPORT, which includes relevant codes, and details the action that needs to be taken.

What can cause a P0134 code?

What Is the Cause of Code P0134?

• Faulty O2 sensor.
• Faulty heater circuit.
• A frayed or broken wiring.
• Poor connection at the O2 sensor connector.
• Engine Vacuum Leak.
• Exhaust Leak.
• Faulty ECM.

How can I get my odometer trouble code?

Alternatively, if your odometer is electronic and doesn’t use the method mentioned above, there is another way to get your code. This is where your paperclip or jumping wire comes in handy. Press the trip and reset buttons on your odometer while engaging the key in the same way mentioned above.

What does code 12 on Check Engine light mean?

Code 12 indicates a problem with my EGR system. This is the system that sends some of the engine’s exhaust into the cylinder to cool the combustion process and keep temps in the cylinders down. Having a broken EGR is relatively common on a high mileage car (I have 180,000 miles on mine) and it’s a pretty easy fix.

How to retrieve car trouble codes with no equipment?

If the link has 12 ports rather than 16, connect ports “A” and “B” with a paper clip or jumper wire. Watch the “Check Engine” light for codes as documented previously.

Where can I find the Acura check engine light code?

Look up your code definition. This tells you where to start testing. If you are unsure of any abbreviations, check out the acronym list by clicking on the link at the left.

How do you find the trouble code on a neon?

Turn the ignition ON-OFF-ON-OFF and ON (not start) within 5 seconds. Count the number of times the ” check engine ” lamp on the instrument panel flashes on and off. The number of flashes represents the code. There is a slight pause between the flashes representing the first and second digits of the code. Longer pauses separate individual codes.

What does the number Flash mean in neon?

The number of flashes represents the code. There is a slight pause between the flashes representing the first and second digits of the code. Longer pauses separate individual codes. FLASH, FLASH, FLASH, pause, FLASH, FLASH = code 32. A code of “55” represents end of error codes.

What does a code of 55 mean on Neon?

Longer pauses separate individual codes. FLASH, FLASH, FLASH, pause, FLASH, FLASH = code 32. A code of “55” represents end of error codes. If you only get this code, then no error codes are stored in the computer. * Check Engine Lamp (MIL) will not illuminate if this Diagnostic Trouble Code was recorded.

What does the pause mean on a Neon code?

There is a slight pause between the flashes representing the first and second digits of the code. Longer pauses separate individual codes. FLASH, FLASH, FLASH, pause, FLASH, FLASH = code 32. A code of “55” represents end of error codes.