Does Autozone fill coolant?
Most manufacturers recommend 50% antifreeze and 50% water mixture. Make sure the fluid reaches the “Full” line. If not, pour in enough antifreeze to reach the line. An AutoZone store associate can help you find the right antifreeze for your vehicle….Will AutoZone put coolant in my car?
| Part Number: | AXA053 |
|---|---|
| Freeze Point (°F): | -34 |
How do you flush a Dodge Ram radiator?
After you dispose the old coolant, close the drain plug and fill the radiator with distilled water. Once again, open the drain valve and let the water drain out of the radiator. Repeat this process at least three times.
How to drain the radiator in a 1998 Dodge Dakota?
Use a 50/50 mixture of coolant and fresh water when you refill your radiator. Allow the engine to cool completely if it has been running. Open the hood of your Dodge Dakota and prop the hood on the support rod.
How do you flush a radiator with distilled water?
Close the drain plug and pour distilled water into the radiator. Then, open the drain plug and let the water drain back out. Repeat this procedure of filling and draining the radiator until it runs debris-free out the drain plug. It will take approximately 3 gallons of distilled water to complete the flush.
Where is the drain plug on a Dodge Dakota?
The plug is located on the engine side near the bottom of the radiator. Position a large drain pan beneath the radiator drain plug. Loosen the radiator drain plug by hand and remove it. Allow the coolant to drain completely from the system. Replace the drain plug once the radiator is empty. Dispose of used coolant properly.
After you dispose the old coolant, close the drain plug and fill the radiator with distilled water. Once again, open the drain valve and let the water drain out of the radiator. Repeat this process at least three times.
Use a 50/50 mixture of coolant and fresh water when you refill your radiator. Allow the engine to cool completely if it has been running. Open the hood of your Dodge Dakota and prop the hood on the support rod.
The plug is located on the engine side near the bottom of the radiator. Position a large drain pan beneath the radiator drain plug. Loosen the radiator drain plug by hand and remove it. Allow the coolant to drain completely from the system. Replace the drain plug once the radiator is empty. Dispose of used coolant properly.
How does coolant work in a Dodge Dakota?
Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Dakota is located and how to add coolant.