Do you have to have the original Acura key?

You do not have to have the original key in order to get a new Acura key. A car locksmith has the skills and knowledge to handle an Acura car key replacement without ever looking at the original key. The is no reason to get bogged down by the various ways this is possible.

Can a 2003 Acura RL start without a transponder?

Keep in mind, this information was obtain referring to a 2003 ACURAL RL, but may work with other model years. A special, electronically coded key prevents the car from being started, even if a mechanical duplicate of the proper key shape is used. A transponder, built into the key, signals the immobilizer control unit that the key is genuine.

What are the keys on an Acura 3.5RL?

This is how the immobilizer system works. The 3.5RL is supplied with three keys and a key number plate: 1. A master key (black) for ignition switch, door locks, glove box and trunk lock. 2. A valet key (grey) for ignition switch and door locks. 3. A packaged learning key (red) for re-coding the immobilizer system only.

How do I cancel my Acura transponder key?

1. Dealer (or roadside assistance) contact Acura Tech Line with VIN to obtain key No. and cancel code. 2. Customer advised to have a key cut from a regular key blank and enter the cancel code using the ignition switch and foot-operated parking brake as follows: Example – cancel code is 54345.

This is how the immobilizer system works. The 3.5RL is supplied with three keys and a key number plate: 1. A master key (black) for ignition switch, door locks, glove box and trunk lock. 2. A valet key (grey) for ignition switch and door locks. 3. A packaged learning key (red) for re-coding the immobilizer system only.

Keep in mind, this information was obtain referring to a 2003 ACURAL RL, but may work with other model years. A special, electronically coded key prevents the car from being started, even if a mechanical duplicate of the proper key shape is used. A transponder, built into the key, signals the immobilizer control unit that the key is genuine.

Can a locksmith cut an Acura key for You?

You can call the dealer or a locksmith to cut the key for you. Keep in mind, you will have to provide proof of ownership and the VIN number. Most of Acura models made in the past 20 years are equipped with some sort of transponder security feature. Therefore, the key or remote will have to be programmed to start the car.

How does the valet key work on an Acura?

The master and valet keys have a built-in transponder that contains an integrated circuit (IC) and each key has its own transponder code. A receiver (antenna) attached to the ignition switch/steering lock assembly transmits power to the transponder (key) when the ignition switch is turned to the (II) position.

What does it mean when your car key won’t turn?

If the car’s battery is dead, you will often notice that the key won’t turn. This isn’t unusual in higher end vehicles, which frequently use more complex electronic ignition systems. Check the life of your battery to verify this. Oftentimes, the problem is not with the related components of the car, but with the vehicle key itself.

Do you need a new Acura car remote?

An Acura car remote cannot be re-programmed, so you need a new Acura remote in order to get your Acura car key replacement done correctly. The mistake of buying the wrong remote is simple enough to avoid. Just be sure to get your new Acura car remote from the same locksmith that will be programming it.

What happens if you put the wrong key in the cylinder?

Factor 3: Incorrect key. Sometimes it’s a simple mistake, and the wrong key is inserted into the cylinder. This happens most often when someone has more than one car key on their key ring. Many keys look similar, especially if they are from the same make. So double check the correct key is being used to try to start the vehicle.

What happens when your key won’t turn in?

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

How to diagnose no start, turn key and nothing happens?

Spark (Only gas engines need a spark, diesel engines need high compression and glow plugs in cold weather to start) Compression (without compression the engine will not run, or not have any power) To read my article where I really lay out the FastC method of diagnosing any no start condition read here.

Why does my Toyota Geo not turn on?

The Toyota and Geo ignitions tend to stop turning because of worn keys. A new “code” key or duplicate key may solve the problem. If a new key does not get your ignition to turn then your ignition will need to be worked on. Vehicles Affected

Why does my Saturn key not turn in?

The Saturn ignitions tend to stop turning because of worn keys and worn ignitions. (mostly worn ignitions) Vehicles Affected The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle.