Do rear strut bars help?

Connecting the front wheels increases understeer, and using a rear bar increases oversteer. Strut bars and sway bars are both designed to unify the suspension and improve handling, and using one doesn’t mean that you can’t use the other as well. Sway bars do a better job of reducing body roll.

Does a 2002 Honda Accord have shocks or struts?

Honda Accord 2002, Bare Strut by FCS®. FCS bare shocks and struts are engineered to restore your vehicle’s handling and control. Shocks, struts, and cartridges are a great option to restore OE performance and normal driving conditions.

What kind of suspension does an Acura TL use?

Help remove that stress by discovering the best available kits for your TL. This article applies to the Acura TL (2004-2008). Acura TL uses a double wishbone front suspension complete with a standalone strut and spring combination that makes for a very smooth ride.

How do you replace a strut on an Acura TL?

With the strut out, use the rented spring compressor to compress the coils so the top hat can be safely removed from the strut. Remove the coil and install the new strut. Torque down the fork to 30 ft/lbs and the three top hat nuts to 37 ft/lbs. The strut tower brace nuts should also only be tightened to 12 ft/lbs.

How do you remove seats from an Acura TL?

There are several 10mm bolts you have to loosen in order to remove the seats. The bench is simple: one 10mm bolt located at the button (refer to Figure 7). After the bolt is removed, press down on the seat and pull the release clip.

How much does an Acura shock absorber cost?

Shock Absorber Reviews Tokico HP Koni Sport KYB Gr2 Monroe Price Per Set $440 $560 $340 $250 Performance OEM/Sport Sport OEM/Sport OEM Durability (Based on User Experience) 75,000 miles 75,000 miles 75,000 miles 25,000 miles Lowered Up to 1.5″ Up to 1.5″ Up to 2″ No

Help remove that stress by discovering the best available kits for your TL. This article applies to the Acura TL (2004-2008). Acura TL uses a double wishbone front suspension complete with a standalone strut and spring combination that makes for a very smooth ride.

With the strut out, use the rented spring compressor to compress the coils so the top hat can be safely removed from the strut. Remove the coil and install the new strut. Torque down the fork to 30 ft/lbs and the three top hat nuts to 37 ft/lbs. The strut tower brace nuts should also only be tightened to 12 ft/lbs.

There are several 10mm bolts you have to loosen in order to remove the seats. The bench is simple: one 10mm bolt located at the button (refer to Figure 7). After the bolt is removed, press down on the seat and pull the release clip.