Can you put a V8 in a 4×4 s10?

Can you put a V8 in a 4×4 s10?

A 1982–1992 Camaro V-8 engine and 700-R4 transmission can be put into an S-10 with just a few changes. The only changes required on this engine to fit it into a 4×4 are the motor mounts, the oil pan, and the offset oil filter adapter. WHOOPS! The above V8 powered S-10 Blazer was real fast.

Can a S10 Blazer be a regular truck?

Most people who drive the V8 S-10 Blazer do not realize it is a modified vehicle because the conversion works so well. No special knowledge is required to drive the vehicle. You just turn the key to make it start, and put it in gear to go. Just like a normal truck.

Can a Camaro S10 be converted to a 4×4?

Before we get started with all the variations and nuances, let’s start with the simplest version of the story. A 1982–1992 Camaro V-8 engine and 700-R4 transmission can be put into an S-10 with just a few changes. The only changes required on this engine to fit it into a 4×4 are the motor mounts, the oil pan, and the offset oil filter adapter.

Why is MY 1993 Blazer not shifting into 4 wheel drive?

On 1993-1994 s10 Blazers etc, the tccm (transfer case control module) looses ground. This causes it to work some of the time , or not at all. Ground black wires at tccm 10c, 12d,13d (the black wires) also you need a good neutral s/w , as it also completes the ground to engage Low range. tccm extreme R behind dash,

What kind of shocks do 2WD Blazers have?

Most of the 1996–1998 2WD Blazers come with Bilstein shocks. After the V8 was installed, the front of the truck (which is equipped with the 1500 lb payload option) dropped less than an inch, the rear dropped about the same.

Most people who drive the V8 S-10 Blazer do not realize it is a modified vehicle because the conversion works so well. No special knowledge is required to drive the vehicle. You just turn the key to make it start, and put it in gear to go. Just like a normal truck.

Before we get started with all the variations and nuances, let’s start with the simplest version of the story. A 1982–1992 Camaro V-8 engine and 700-R4 transmission can be put into an S-10 with just a few changes. The only changes required on this engine to fit it into a 4×4 are the motor mounts, the oil pan, and the offset oil filter adapter.

Most of the 1996–1998 2WD Blazers come with Bilstein shocks. After the V8 was installed, the front of the truck (which is equipped with the 1500 lb payload option) dropped less than an inch, the rear dropped about the same.

What kind of gas mileage does a blazer get?

With 235/75-15 tires and 3.73 gears, this Blazer gets about 22 mpg on level freeway trips at 65 mph. Normal overall fuel mileage is about 15-19 mpg. 0-60 mph takes ten seconds at sea level. This truck now weighs about 3900 lbs and has every factory option.

Can you put a V8 in a 4×4 S10?

Can you put a V8 in a 4×4 S10?

A 1982–1992 Camaro V-8 engine and 700-R4 transmission can be put into an S-10 with just a few changes. The only changes required on this engine to fit it into a 4×4 are the motor mounts, the oil pan, and the offset oil filter adapter. WHOOPS! The above V8 powered S-10 Blazer was real fast.

Are there any aftermarket parts for a Chevy S10?

We supply new aftermarket Chevrolet S10 Pickup essentials like headlights, taillights, and mirrors as well as radiators and exhaust manifolds. Our new aftermarket S10 parts last 2-3 times longer than used Chevrolet OEM parts.

Where was the Chevy S10 pickup truck made?

The S10 remained popular. It was built in the US until 2005, when it was replaced by the Chevy Colorado. The second generation S10 continued to be built in Brazil until 2012. Need S10 Parts? At 1A Auto Parts, we supply a large inventory of parts for the Chevrolet S10 compact pickup.

What are the features of a Chevrolet S10?

Control Arm with Ball Joint Assembly, Front Upper Passenger… Highly configurable, fuel-efficient, and affordable, your Chevrolet S10 has all the features of an outstanding compact pickup truck. However, like any other truck, it’s not immune to wear and tear.

What was the first generation of Chevy S10?

Other options that became available in the S10’s first generation were an extended cab and four-wheel drive. GM eventually spun-off a series of SUVs built on the S10 chassis: the Chevy Blazer, GMC Jimmy, and Oldsmobile Bravada. Chevy updated the S10 in 1995.

What kind of parts do you use on a Chevy S10?

When you replace parts on your S10, you want to use parts that you know are going to fit, so you use genuine OEM replacement parts like those sold by GMPartsCenter.net. Suspension – The ride in your S10 will remain a smooth one as long as the suspension is in good shape.

Do you need to replace brake pads on a S10?

We have replacement parts for either an automatic or a manual transmission S10. Brakes – As part of your maintenance schedule, you replace worn brake pads and sticky calipers. You may need to replace rotors, lines or other brake parts. We carry replacement brake parts including parking brake parts.

When did the Chevy S10 pickup truck come out?

Chevrolet first introduced the Chevy S10 in 1982 as replacement to the Isuzu built Chevy LUV pickup. It was one of the first compact pickup trucks from a domestic manufacturer. It is very specialized: it has special frame, special tires, special wheels, special shocks, and special springs.

Why is the engine light on on my Chevy S10?

If you drive a first-generation Chevy S10 model, you’re probably used to the engine light occasionally activating. This is usually due to a damaged wire or fuse. Fortunately, you don’t have to put up with these problems.